Search results

  1. 302efi

    Valve Springs for Iron Heads ?

    Ok I'm thinking of putting my old ported World Jr's back on the car for a while while I get the Canfeilds redone. I'm running a AFM N-71 with .576/.576 lift. Whats a good spring that will take on the heads ? I guess I'm looking for .600 lift springs thats plug and play on the iron heads ?
  2. 302efi

    5 lug swap is done...WAY to much postive camber..

    I never put the isolators on the new springs...Well my old stock srings didnt have them anyway way:)
  3. 302efi

    5 lug swap is done...WAY to much postive camber..

    I posted this over at Corral as well and it seems that a few people over there has this positive casmber issue as well... Its pretty much a basic spindle swap with the addition of the washers and screwing out the tie rod ends...I did 2 other 5 lug swaps on other foxes I've had...no problem...
  4. 302efi

    5 lug swap is done...WAY to much postive camber..

    I put FMS C springs in as well and I reused he stock struts... I'm getting a set of MM cc plates today off my buddy for $25:)... Are you guys sure CC plates will solve me problem ?
  5. 302efi

    5 lug swap is done...WAY to much postive camber..

    I reused my stock fox control arms... I'm sure the spindles cam off a '94...I got all the part from a '94 GT, it had a 5.0 in it and I even found the the 1994 owners manual in the glove box and I checked the build date on the door and it was 11/93...
  6. 302efi

    5 lug swap is done...WAY to much postive camber..

    My stang is a '91 and I'm using the '91 struts.
  7. 302efi

    5 lug swap is done...WAY to much postive camber..

    I went with bullits like you did :nice:... I got the stock camber plates adjusted all the way toward the middle of the car and the top of the wheels are still sticking out a little bit.. What I'm gonna do is take the struts our and use a drill to make the mounting holes longer so I'll have...
  8. 302efi

    5 lug swap is done...WAY to much postive camber..

    I followed everybodys websites and all...the setup is all from a '94 GT and it all bolted up no problem. It just the common swap so I don't see how anything could be wrong ?
  9. 302efi

    5 lug swap is done...WAY to much postive camber..

    So I got the SN-95 5-lug swap done yestersday and the tops of both front wheels are sticking out ...Now I know this is positive camber..I already tried to move the stock camber plates and they did not move far enough to get me at zero camber..Is CC plates my only option ??
  10. 302efi

    466 Fox Update

    My 9 sec Honda can take that :D :p
  11. 302efi

    466 Fox Update

    The kinda torque hes gonna make might take its toll on a C4 quicker then the C6 :flag:
  12. 302efi

    466 Fox Update

    I would go with a bigger stall then 2500...something along the lines of a 3500 or so.
  13. 302efi

    351 Cleveland heads on a 302 block

    You should have used the search...I asked this question a long time ago.... FYI, its called a "Clevor"
  14. 302efi

    Can I use SN95 control arms when I'm doing my 5 lug swap ??

    Yeah guys.. I already have all the parts for the swap...axles, drums.. and a whole '94 GT front brake setup including the control arms. It just seemed to me that the '94 front arms might be a better choice over the my stock fox arms, but I wasnt sure if they were a bolt on, or not ?
  15. 302efi

    Can I use SN95 control arms when I'm doing my 5 lug swap ??

    Thanks wildstang607...10.5 in rear!!! holy **** !!!! I'm going with bullits (17x8) so I dont think mine will stick out like yours does...
  16. 302efi

    Can I use SN95 control arms when I'm doing my 5 lug swap ??

    I've heard that the 94 and new models have a wider track, so thats why I was asking:)
  17. 302efi

    Can I use SN95 control arms when I'm doing my 5 lug swap ??

    Can I use SN95 FRONT control arms when I'm doing my 5 lug swap ?? I'm in the process of doing the 5-lug swap on my '91 notch. I got all the parts from a '94 GT. I got the control arms as well...can I use these on my fox ?
  18. 302efi

    Adapter for SN95 soft brake lines to Fox hard brake lines ??

    I'm in the process of putting the SN95 Brake setup on my '91.................... I NEED THIS ADAPTER !!! Where can I buy this adapter ?
  19. 302efi

    Lugnuts for Bullits wheels on a Fox ?

    What kinda lugnuts do I need for Bullit wheels that or going on a Foxbody...What style ? I checked Matt's site and It doesnt say what kind.
  20. 302efi

    Thanks Comp Cams...Love the quality...

    I hope they make it right with me on this. I could see this happening if I was using some crazy ass lift, but I was on the mild side. If they don't, I was looking at anice Lunati set:)
Top Bottom
Back
Forums
Menu