Search results

  1. M

    Wobble in steering. What's causing this?

    my steering wheel would vibrate/wobble during braking but i wouldn't feel any pulsating in the brake pedal. I replaced the rotors, brake pads and bearing. Wobble went away.
  2. M

    have you twisted or bent an axle?

    anybody else? has anyone had a vibration go away because the replace the axles and axle bearings?
  3. M

    have you twisted or bent an axle?

    i have an aluminum driveshaft so I'm trying to figure out what else could be my source of vibration. different sets of tires have been used, the tranny and tranny mount have been replaced, different set of gears have been installed. I can't remember if I got the bearing (name?) replaced...
  4. M

    have you twisted or bent an axle?

    the tires have been balanced so i don't think that is the issue and this is not the first set of tires with this vibration.
  5. M

    have you twisted or bent an axle?

    i get a vibration around 75mph which is speed related, not engine rpm related. I've replace the driveshaft and u-joints. The passenger side axle seal is leaking so I'm wondering if my vibration could be caused by the axle. I figure I would get the axle bearings replaced as well. Can a shop...
  6. M

    have you twisted or bent an axle?

    if so, can you explain to me the symptoms? I'm wondering if the previous owner put slicks on the car and damaged the axles.
  7. M

    engine codes 33 and 63

    i believe code 33 is TPS low voltage and 63 is the EGR valve can't open or close. any suggestions how to fix each code?
  8. M

    carfax check please

    ttt...anyone
  9. M

    carfax check please

    1FALP47V7VF115996 email [email protected] thanks.
  10. M

    Front main oil seal.. how hard to replace?

    i just replace my waterpump, timing chain and gears. When you remove the timing cover, the front portion of the oil pan is exposed. I cut and remove the exposed oil pan gasket. I purchased a new oil pan gasket. Cut and spliced on the new gasket to the oil pan with RTV silicone as I put the...
  11. M

    Tires on 10 holes

    i run 235/60/15's on 10 holes on all 4. with these tires, they are a bit taller so you speedo will be a off a bit. also, if you decide to buy rims, skip the pony's and get yourself some 17's.
  12. M

    weird idle problem

    i believe the ECT sensor can affect the cold idle. something to look at. have you pulled the codes from the computer yet? you might want to that first. if nothing else, it get this thread back up to the top.
  13. M

    black powdercoated ponys

    man, get some feterlizer on that lawn. overseed in the spring, put down lime in the late fall. nice lookin ride.
  14. M

    fuel pump not turning on

    well, the fuel pump stopped working on Thurs afternoon, stranding me at a parking lot. I go back up there on Sat to figure out where the problem is and wouldn't you know, the fuel pump turned on and the Stang started. I'm not sure if I should be relieved. Finding what went wrong is...
  15. M

    jumping the fuel pump relay

    how does one do this?
  16. M

    now what?

    i have an electric fan.
  17. M

    fuel pump not turning on

    ok, fuel pump is not priming so i got stranded. luckly i found a ride. the fuel pump itself was replace last spring and i did not have any issue with it since then. i figure i first need to confirm that the pump is getting power. if it's getting power, then it must be the fuel pump...
  18. M

    now what?

    it was a stock replacement gear set from the Ford dealership. I plan to remove the belt and see if the vibration is still there. unfortunately, i have another problem...fuel pump not turning on...
  19. M

    engine miss

    did you examine the sparkplug. i had a miss once. it turns out the plug had a hairline crack causing it to arc.
  20. M

    now what?

    ok, i'll try to be clear. the car never vibrated at 2000 rpm's. i replaced the cam gear, crank gear and timing chain. put the timing cover back on, put on a new water pump and i put back on the original balancer. i got the vibration the first time i ran the car after the work. i looked at...