Search results

  1. D

    95 stang door locks

    ok guys my door locks will only turn to the right. so i can lock the driver door but not unlock it. the passenger door i can unlock but not lock. whats the deal? are the locks bad or am i missing something?
  2. D

    95 stang converted to carb help

    the harness is not there from the trans to the engine compartment. but all the connections are from the engine connector to computer. i will give this a try and see what i get. hey rick can you pm me with your number so i may contact you and ask a few questions.... thanks man.
  3. D

    95 stang converted to carb help

    ok i just bought a 95 that has been converted to carb. the computer is still in the car. the harness on the passenger side is disconnected. the big harness with the bolt and the smaller ones there as well. my question is that i want my speedo to work again. what wires or harness do i need for...
  4. D

    My spark plugs dont fit the GT40 heads

    ask for the plugs for a 93 or 94 mustang cobra. motorcraft plug should be the asf32 i believe. but i ask for 94 cobra plugs when i go in and that it what i get and they work great
  5. D

    Mass Air Conversion help...

    you can get the granatelli harness from jegs or directly from granatelli for 79.00. it is what i used. also make sure you disconnect the vacuum line from the map/bap sensor and plug the line but keep the map/bap sensor vacuum line unplugged but do not disconnect the wires from it.
  6. D

    fuel smell issue

    well it was fine for the last 5 months. just started doing this. so i don't think the o/r ppe is to blame. could it be a leaky injector? o2 sensor? emissions stuff malfunction? how to check the carbon canister? gas mileage has also gone down. now only get 125 miles to a tank. need fix...
  7. D

    good spring upgrade for GT40 cast iron heads ?

    get some comp cam springs. you can use the springs they recomend for the lift of .512. they are about 90.00 bucks. that is what i have on my gt40 irons and stock cam right now. will upgrade the cam later but i know the springs are good up to 512 so if i want to run a b,e,f or tfs stage 1 the...
  8. D

    Smog pump holes in the rear of stock heads

    can use a bolt. i melted down old pistons to fill them
  9. D

    Help with Tag name for car

    faahq bcknblk stanged btl fed nicetry uwish ponyboy 50fox 8achevy lswhat byebye blwnawy shiftn spanked cya and mny more :) lol
  10. D

    fuel smell issue

    will check those. the fuel pressure seems to be good. 39 with vaccum line off and 35 with it on. will check canister. the fpr is good thouh. no gas in line or eratic pressure.
  11. D

    fuel smell issue

    on my 87 fox i have notice lately that when i get on it it is fine but when i let off the gas i can smell a strong gas smell? was doing it with the 19 lbs injectors so i upgraded mass air and to 24 lbs injectors. any clue? want to solve this issue quickly. was running fine up till about 3 days...
  12. D

    Huge Problem: Maf Conversion

    if you use a newer harness the fuel pump will not work. it will have to be hard wired. when i convert for people i make them spend the 79 bucks on the granatelli harness . saves a ton of time and problems. keeps all the factory wiring so it is guarantee for everything to work. just my .02 but it...
  13. D

    Cam questions for my 86 gt

    it has been converted to mass air. i am running a a9p computer and stock maf on my 5 speed car. just don't want to have to rebuild a motor that runs great just to have a cam.
  14. D

    Cam questions for my 86 gt

    ok guys and gals. i believe the pistons in my 86 gt are factory. I also have a set of E7 heads on it. can i run a cam since i believe that the stock flat top pistons with no valve reliefs are still in there? the car is all stock except the E7's on it and the roller rockers.
  15. D

    Emmissions Woes, is toluene the answer?

    i used a piece of garden hose. if you have enough of a nub to use hose clamps to hold the hose on you are in buisness for the inspection. i have used it twice while in a pinch. just keep it off the h pipe so that it does not lay on it or it will melt.
  16. D

    air fuel gauge help.

    1986 mustang with speed density. i have the sunpro cp8200 air fuel guage. my question is what wire on the o2 sensor do i hook it up to? it has 1 black and 2 white wires. it is hooked up now but is shows all the way lean and then when you rev it it starts to light the led right next to it but it...
  17. D

    Help me speed up my virgin

    hey guys. i just got a 86 gt that is stock except the cold air and the e7 heads. it is speed density and still has the stock exaust headers and pipes. so i have 2 questions. one is specific and the other is advice. 1. how big of a cam can i run on a speed density car? 2. what bolt ons can...
Top Bottom
Back
Forums
Menu