Search results

hey guys, i have a trick flow stage 2 cam in my 94 along with twisted wedge heads and track heat intake on a 306 dss block, im going to be putting a turbo on and i think the cam in it is gonna be too much, anyone know what kinda cam to recommend? also would i be better off getting a custom...

will a pcm out of a late fox work in 94 gt? if so does it plug right in as long as its from a 5.0 5speed car? my stock pcm just come up prom error code everytime i scan it, my car has a dss 306 trick flow heads and intake, also a stage 2 cam, thanks guys, much is appricated to get it running...

my cam is a little aggressive and i barley make vacuum, anyone know where i can find one of those vacuum canisters?? im having a little trouble finding then online, any help would be appricated. thanks!

my 94 gt seems to be running lean. i have the fuel pressure set at 39 idle and 45 WOT. when i changed the plugs they were frosty white. also i noticed a vacuum leak, right under the intake manifold and on the upper intake, when i capped it the car runs like crap and surges, and stalls when i...

i feel that my car is a little doggish when it gets warmed up. i have the fuel pressure at 39 at idle and 45 WOT. i did a fuel pressure test and driving around it vaired from 33-40. and WOT it varied from 41-45. i am going to do plugs on it tomorrow. when it runs for a minute or two and then i...

what fuel pressure should i be running? my mods are dss pro bullet shortblock, trick flow twisted wedge heads, track heat intake, trick flow stage 2 cam, bbk long tubes, catted h, compression ratio is 8:5:1 right now i have it set at 39 at idle and 45 wot, any help would be appricated. thanks!

my steeda cable stretched so i put a new stock cable in, but it grabs way too low, i wanna adjsut it so it will grab a little higher, i have the steeda quardrent in there still, would i be able to put the firewall adjuster on? or is there anyway i can adjsut it? thanks! its for my 94 GT

http://forums.stangnet.com/showthread.php?t=492331 well after two years, i wound up selling the cobra and buying the gt back. plans are hp 67 trim turbo kit :D

well i dyno'd my car at school a few days ago, alls i got is off road x, slp lm2, bbk cold air, i put down 302rwhp 301rwtq, what do u guys think of those numbers?

well i was leaving school on friday and i was at a stop and some kid rear ended the car behind me and it sandwhiched me in between an suv, his hitch went right threw my bumper, bent the bumper support and bent my condensor, but nothing is leaking thank god, it did activate my interia switch...

well i fixed my studs but i cannot get my caliper over the rotor it was a bitch and when i finally got it i could not align the bolts up right, the piston needs to be compressed, does anybody in the area have the tool to compress it? it would be greatly appriacted, im a college student with no...

well the other day i was driving and all of a sudden i hear this noise and the rear came out a bit, i get out of the car and noticed that there is only 1 lugnut holding my wheel on! 2 studs broke and the other 3 are stripped, so im going to need 5 new studs and lugnuts, jsut my luck :shrug:

i hear a clunk everytime i shift...u joints? :shrug:

i have the eibach pro kit springs on my 99 cobra, but i wanna go lower..what are some good springs? thanks

im having a little bit of hard shifting after the new clutch and flywheel, i laso have a steeda clutch adjsuter and i have played with it many times to get it right now didnt have much luck, i heard from somewhere to adjsut the cable going to the trans...does anyone know how to do it? thanks

i cant seem to find the instruction guise to install my vortech...does anyone know where i can get one? or is there anything online where i can find on how to do the install, i searched but didnt have much luck. :(

im having some hard shifting issues...i recently had my spec stage 2 clutch and aluminum flywheel put in along with a steeda clutch adjuster. i tried adjsuting it from the top but had no luck, is there anything i can adjsut from the bottom? thanks

well my bilstien strut leaked everywhere so im gettin some tokico d specs, while im doing this is there anything else i should replace? thanks

there seems to be some play in my clutch pedal...i also have another problem, when i take the car in the high rpms (6400) and when i shift it seems to hesitate going in the next gear, but it only does it in the higher rpm's, i just got my spec stage 2 clutch in and alum, flywheel in. anyone have...

well my traction control switch jsut stopped lighting up and doesnt work....im goin to go check to see if its bad with a multimeter, if its bad how much would a switch be? i went crazy looking for it online and had no luck and the dealerships are closed being its 4th of july, if anybody knows...