Search results

  1. Boostedpimp

    Interior and Upholstery Anybody try Audi or VW mk5 seats in a fox?

    Wondering if anybody has tried vw seats in a fox like the MK5 and GTI seats? Are they too narrow or too wide etc
  2. Boostedpimp

    Steering wheel install

    So finally getting around to installing my Momo wheel in my 93 and want a functioning horn. The Yellow/Light Green wire is the only one I need for the horn but I don't want to cut and splice like a fool. So does anyone have an idea on what type or name of connection that is? It runs to the...
  3. Boostedpimp

    Fox 93 Foxbody Coupe value

    I figured I'd share data my classic insurance has on market value sweeps from the last five years to the month on my year coupe.. which I thought was pretty interesting and worth sharing even though there would be many variables involved determining value obviously .
  4. Boostedpimp

    cjponyparts

    View: https://youtu.be/znA-Yjbo2_8
  5. Boostedpimp

    coilover cleanliness

    What trick or methods is everyone using with keeping their coilover sleeves clean? I have coilovers on both foxes I own currently and one fox I daily drive in all types of weather conditions. So when I went to adjust the ride height two days ago it was fun. Ten minutes on driver side and I was...
  6. Boostedpimp

    Engine PCV port on throttlebody

    So i'm aware of what it is and why I will be keeping it funcitional but the problem is it hits my stock hood badly. I'm done with the aftermarket game and really prefer the stock hood look so was thinking of trimming this tube down a little bit but not sure exactly how to go about removing it...
  7. Boostedpimp

    Compression fittings on fuel line

    My 93 coupe was nice enough to grace me with 93 octane all over my driveway last week. Turns out I have a pin hole in the feed line back by the filter which shoots a steady fine stream of fuel across to the filter/tank area which then drips and splashes onto the tail pipes. Car isn't a daily...
  8. Boostedpimp

    Forced Induction Oil pan to oil drain line fitting size?

    Does anybody know what the oil pan to line fitting size would be for a novi2k kit? Would it be -8? My situation is that I removed and sold a paxton novi2k kit that was on my car for years. Blower was great but I shifted over to n/a build and so I'm left with the fitting in the side of the oil...
  9. Boostedpimp

    Lower to block torque spec

    What does everyone torque there lower intake down to? and do you have aluminum heads or iron? I ask because I recently was involved in a convo where everyone had mixed suggestions regarding this topic.. Some said with aluminum heads you do less while others said to keep it the same regardless...
  10. Boostedpimp

    Electrical Fuel pump relay

    I messed up and need a little help. Long story short I mixed up the wires on the I believe the WOT relay and can't remember which wire went to which post on the relay. If anyone has there's accessible and doesn't mine taking a look for me I'd appreciate it. The relay in question has the...
  11. Boostedpimp

    Fox starter solenoid power connections question

    What has everyone done with there starter solenoid in terms of power attachments? I've ran out of real estate on the bolt thread for all the components. Just have the typical connections like the Circuit breaker for windows/doors, the yellow wire, the green wire, the blue wire, the starter...
  12. Boostedpimp

    Fox Mystery Wire

    So I'm in the middle of a 93 four banger conversion and during the peddle swap I yanked the steering column out. Once I went to button everything back up this wire had no home to return to. I looked on my 88 and it's not present on that car. I don't recall ever seeing this wire on any of my...
  13. Boostedpimp

    Electrical Does Anybody Have The Fuel Pump Wiring Schematics For A 91?

    Long story short my little brother shorted out a fuse link while relocating his wiring into the fender. Battery was disconnected but when he connected it something was touching anyways we replaced the bad fuselink and I ruled out the inertia switch, pump and wiring to both. Fuel pump relay is...
  14. Boostedpimp

    50 shot kit recommendations for daily driver?

    Thinking about throwing a small shot of giggle gas on my 88 hatch.. one where it can be hidden and used when I think I may need a little bit more. IM a complete noob when it comes to nos and what there is out there and what all the supporting mods are that are needed so if someone wouldn't mind...
  15. Boostedpimp

    Shock tower rust

    Is there anyway to fix this other then maybe cutting them out of a donor car? My daily driven 88 hatch has some decent rot and im getting concerned about it a little. Just want to know what my options are so I can start saving some money up to deal with it. Here's pic of some of what im...
  16. Boostedpimp

    Window motor R&R

    Ok time to do the passenger window motor... i've never changed the motors out before in a fox, only in an sn95 and it was a complete pita.. the whole track etc had to come out but I see with these there's only the motor so does anybody have any write ups or instructions on how to go about...
  17. Boostedpimp

    Need size of plugs to delete EGR coolant lines

    I want to stop the egr from having coolant pass through it so I want to plug the connection from the metal heater crossover pipe that runs to the heater core and plug the port on the lower intake in the back but Im not sure what size plugs I need.. Anybody have the sizes needed so I can minimize...
  18. Boostedpimp

    Door handles

    It's time to replace the door handles on my car and after checking out my options it seems there's only the metal handles out there now a days which is ok with me but is there anybody out there using the handles that don't use rivets? I'm asking because I've never really delt with rivets and...
  19. Boostedpimp

    cranking, fuel pump's priming but no starty

    Figured i'd run this by you guys since there's allot of good people on here that know there stuff.. car is a daily driven 91gt that has the following mods: stock block/heads trickflow street intake combo trickflow stage 1 cam bbk 70mm tb pro m maf 75mm cal'd for 42lb injectors green...
  20. Boostedpimp

    tubular kmember question

    I found a tubular k member for a fox for $100 but the problem is he's not sure of what the make is and that it has no motor mounts because it was used with a motor plate for a SBC. My question is could I just slap some motor mounts on it and drop it into a fox or will this no fit a fox with a...