Search results

I have swapped over to a solid axle, and think I have a bad bearing some where inside the rear end. I had some bald tires on, which led me to suspect the tires were causing the noise, but I just got new ones put on and the noise is still there (I also put on a set of friends tires to rull out a...

I do not see boost in 1st or 2nd with 4.10's. I only see about 10-5 HG in vacuum in 1st and maybe 1lb of boost in the top of 2nd. I know boost is correlated to engine load, so if I put more load on my engine, i.e. higher gears 3.73's will this net me more boost and HP? I need to do something...

I have a Novi 2K and the hose from the driverside valve cover is connected right after my MAF and right before my head unit. The reason I ask is that I have to clean out my intercooler and pipes every 2 weeks because oil vapor is pooling up in the intercooler. I am already running a 98PCV valve...

Auto Meter sent me a 1/4 and 1/8 adapter. I can't remember what size fitting the Supercharger feed line is. What size T fitting do I need.

More wires and I have to find a place to mount this box as well. Should I send it back and ask for the newer model?

Can I pick it up at a hardware store or do I need to order it? Whats the male and female NPT sizes that I need. Thanks

Getting Gauges for X-mas, What fittings do I need for the fuel rail? Autometer Gauges are under my tree. I am getting a fuel pressure gauge, boost, and oil pressure gauge. What fittings do I need to instal the fuel pressure gauge? I heard it was a 90 degree NOS fitting? Likewise, with my...

I thought they were suppost to be avail. this month :shrug:

What is the safest horsepower leveel?

Are they any good?

I changed my pulley on my supercharger from a 3.5" to a 3.3" and I put a new 1073 Napa Gates belt on. I noticed that this belt was at least 3/4 of an inch larger with the same part numbered original Gates that came with the Novi :shrug: Anyway, I've had this belt on for about 3 weeks now and it...

Just installed a 3.3" RR pulley about 2 weeks ago and I am experiencing a lot of belt dust. My stock 3.5" never left any belt dust :shrug: My replacement belt aslo was a bit longer even though it was the same part number. :mad: So there is a significant difference in slack. Would a shorter belt...

I have an Intercooled Novi 2000 and was wondering if you guys are experiencing oil has saturated any of the discharge pipes. I think I am blowing oil out of my oil return line, but it is not a huge amount. I never leak oil onto the ground but you can tell that it is being sprayed out of the oil...