Search results

  1. W

    What compression ratio for NOS?f

    I am interested in this as well. I will be going with a 5cc dish with the stock bore on a 00 GT.
  2. W

    BBK LT Headers, QUESTION

    I have the BBK ceramics and love them. The only thing I have heard about the chrome is that they will discolor with the heat. If you are not worried about that, then you are in there. Other than that, they would be a good choice. The only problem with the BBK's is that if you are planning to...
  3. W

    VT Stage 1 and 2 cam questions

    I just put in the stage 2's and so far, they are awsome. Personally, I wouldnt do a cam swap without a spring swap. I have a 00 GT with about 50K on it and my redline is 5900. I dont think I would be comfortable running my engine past redline with stock springs even with the stock cams in it...
  4. W

    Cobra brake upgrade question

    I have my stock rims (17X9) with the upgrade and I have no problems. It looks awsome. They fill up the wheel real nice.
  5. W

    CHEAPEST place to buy VT stg 1 cams.

    Modular Powerhouse is the cheapest I have seen.
  6. W

    Modular Depot or Modular Powerhouse

    I have the MPH tune. Tim is a great guy to work with. Got my car dynoed at Dr. Gas while on his tune and the guy running the dyno said that it was one of the better tunes he had seen. I have not heard anything bad about MD either but I would go with MPH. Just my opinion.
  7. W

    Will this work with a hypertech programmer 3?

    I didnt have any problems. I have the stock MAF but 70 mm TB and the C&L plenum and I didnt have any problems. If you dont have the Hypertech yet, let me know, I am looking to let mine go, cheap.
  8. W

    Chrome Exhaust tips -----Cleaning tips?

    I used coke and some aluminum foil. Worked great believe it or not. I saw it on MythBusters and decided to try it. Cheaper than the alternative and it worked.
  9. W

    Need Technical Advice Fast!!!

    SCT flasher
  10. W

    Do i need a new maf???

    Stock injectors should be 19lbs. How did you try to clean the MAF?
  11. W

    t & j performance

    Tim (cobra killer) is a great guy and is always willing to help. I dont think that I have ever sent him an email that he didnt personaly respond to.
  12. W

    PI Heads or P&P

    Then you have the PI heads. A good P+P job will not be cheap. Talking to a guy right now who is charging $1300 for the basic P+P and bigger valves. Since I will be in there anyway, I am going to be putting in different cams and valvesprings. I would like to see around 30 rwhp or so. So as...
  13. W

    PI Heads or P&P

    What year car do you have? 99+ already have the PI heads on them.
  14. W

    arizona, nevada, utah, idaho...come in!!!!!!

    Hill is OK. I guess it depends on what you like to do and your religious preference. The winters suck. There is snow on the mountains as I write and we are suposed to get some in the valley on Thursday. The night life is OK, you have to be a member of a club to get in, kinda like a cover...
  15. W

    arizona, nevada, utah, idaho...come in!!!!!!

    F-16 WEAPONS! 9 years, all at Hill except for a year at the Kun.
  16. W

    U-joint life expectancy?

    Mine went bye bye at 41K. Love my aluminum DS!
  17. W

    Good Mustang Shop in Salt Lake City Utah

    DR. Gas is HQ in Sandy. They have a dyno and I have heard they are pretty cheap. I am going to be talking to them real soon about a spin on their dyno. If you need some machine work done, give Daymon at RPM Rons a call. He does all kind of machine and engine work and has a wet and dry flow...
  18. W

    arizona, nevada, utah, idaho...come in!!!!!!

    Not as strict as CA but not all that easy. They dont have a visual insp but you still need cats to pass. I have LT's with a BBK catted H and didnt have a problem passing the sniffer. BTW, I am at Hill in UT
  19. W

    DenseCharger

    I have one and its ok. If you get the strut tower brace from maximum motorsports, you will have to do some cutting.
  20. W

    Question about Aluminum Driveshaft/Flywheel

    Altohugh I noticed Ford ISN'T using DANA u-joints on them anymore THAT SUCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Top Bottom
Back
Forums
Menu