Search results

  1. MysteryMachine

    Wheel/tire Combo Question

    Need tires for my 96 GT and while browsing Craigslist I found a set of 17x9 Cobra R wheels with 255/40/ZR17 tires. Will these fit without and issues or modifications? I was going to swap the wheels and tires off my 94, but they are wider and I know the quad shocks need removed for them to fit...
  2. MysteryMachine

    Issues After Intake Replacement On 96 Gt

    Well spent the afternoon putting in new plugs. I did find a couple were full of water again while changing them. It looked wet around the intake which had me thinking the new one leaked as well. After getting everything back together I fired it up and it seemed to sound better. I reved it and it...
  3. MysteryMachine

    Issues After Intake Replacement On 96 Gt

    I did have water in a couple wells when I changed the intake. I'll give that a shot.
  4. MysteryMachine

    Issues After Intake Replacement On 96 Gt

    I was gonna do a PI swap but didn't wanna spend the money at the time so I went with a replacement. I did pull 1 plug wire last night and the snapping it made scared me a little LOL. My biggest fear is that the intake itself is leaking where that bolt gave me issues. I'll try and take a look...
  5. MysteryMachine

    Issues After Intake Replacement On 96 Gt

    umm at idle it doesn't seem too bad. You rev it and you can tell something isn't right. When driving it, it doesn't have the power it should. The intake has the same ports as the stocker, my dad bought it for me off ebay. It was a birthday present. If I could find the link I would get it for...
  6. MysteryMachine

    Issues After Intake Replacement On 96 Gt

    This has been an issue for months now. I would think by now that would be dry, or am I wrong for thinking that?
  7. MysteryMachine

    Issues After Intake Replacement On 96 Gt

    I replaced the intake cause the stocker was cracked. Since then it sounds like a WRX. It runs like crap of course. I had the codes pulled and was told it's running lean. Pulling the fuel injector plugs one at a time doesn't really make much of a difference at all. 1 or 2 of them will make it...
  8. MysteryMachine

    Keyless Entry?

    Lol figures I don't post here in years and when I do I misspell and write truck instead of trunk. I've had my my bouts with that stupid box on the Mystery Machine. My trunk leaks and it dripped on it frying it. I was able to take it apart and dry it once or twice but the last time I tried I...
  9. MysteryMachine

    Keyless Entry?

    If you mean the black box it should be in the truck behind the carpet on the drivers side.
  10. MysteryMachine

    Intake with gaskets built in?

    Awesome thanks
  11. MysteryMachine

    Intake with gaskets built in?

    Hey guys my dad bought me a replacement intake for christmas. Mine was cracked in a few places and I haven't had the money to buy one myself. He showed me a listing and I said ok but I think this one is different then the one I told him was ok. Anyway I got it all the stuff switched over and...
  12. MysteryMachine

    She's Here!! My Future Stanger

    Vib I'm not old... lol I just turned 30 on the 23rd. Brought her home today. I wish I wasn't sick cause it's dampening my daddy daughter time. My dr told me to wear a mask when I hold her for the time being :(
  13. MysteryMachine

    She's Here!! My Future Stanger

    thanks guys. I'm so happy I chose to stay in the room. I didn't totally watch her being born but I was in there which made an impact
  14. MysteryMachine

    She's Here!! My Future Stanger

    Addison Jinx Ratcliff 11/6/12 @ 18:24 7 lbs 9.4 oz 20 1/2 in Mom and baby are doing great. I wish I wasn't sick so I could have held her more last night. Going back to the doctor today and hopefully can hold her more tonight. The pictures make her look big but she is small
  15. MysteryMachine

    Current Before And After Pics Of My Project :)

    Looks great man. As far as the sequential taillights go. I had a fb friend selling the splice in kit that AM sells for $100 for $20. I jumped on that deal. It's actually pretty easy to install. Just make sure the second splice goes to the right bulb. I did mine backward so they flashed from the...
  16. MysteryMachine

    The Mustang Curse Is Back

    Ended up deciding aganist the swap. After looking up all the other parts needed to do it it was another 350 bucks not counting shipping. Wasn't planing on having to spend all that so I'm just gonna order a replacement intake and put it back together
  17. MysteryMachine

    Engine Pi Swap Questions

    OK I'm sure this has been covered a million times so I'm sorry but I have some questions. I have been in talks with a guy on corral about buying his PI swap stuff. I have a 96 GT so it's a Romeo engine. He says his stuff came off a 02 Crown vic sport and that it's a Romeo as well. I have...
  18. MysteryMachine

    The Mustang Curse Is Back

    Well have been in talks with a guy on Corral from MD about a complete PI swap. My dad found a non PI intake on partstrain (not sure how good they are but the cheapest we have found) for $183. The guy in MD is willing to sell me the complete swap for $300. Depending on what he says when he gets...