Search results

Problems with my A/C. Started with when i purchased the car, the compressor was not hooked up but was new still had the protective caps over the ports. So I buy the lines that were missing, added recommended oil (manufacture recommendations on tag) added freon and car blew warm air and...

2004 Mach 1. I have noticed when at higher RPM's (but not redline) the car sputters, almost like its hitting the rev limiter and the traction control light comes on on the dash, even with the traction control turned off by the button. I had the car tuned and have an SCT X4, in the tune I had...

Looking for help trying to locate which pin is the KAM wire on the 60 pin connector. Also what voltage I should be getting from it and where the wire comes from. Thanks.

95 cobra motor. Car only blows hot air from heater getting hot and overheating. Stock gauge reads fine sometimes sometimes it pegs on red. A few times it blew hot air from the heater vents now after replacing with the new stock 195 t stat with a 180 T stat it blows cold. The top radiator hose is...

Search here didnt turn up much. Basically as the title says. In my 95 gt the cluster stopped working. Everything did except the bright light indicator and the dash lights.... No gauges work at all.....

Out of the blue my 98 GT battery light came on. I checked the voltage at the alternator and was getting like 12.xx, checked the voltage at the battery and was within +/- .x Checked the alternator and battery off my 97 the same as i did on my 98 and got 13.5 at the alternator and 13.xx at the...

The car is a 98GT and has CAI, BBK throttle body,catless H pipe,and is an auto,stock heads and PI intake (dorman :() I have a weird issue after installing a PI intake and the other mods above (never noticed this issue that i remember with it being stock). I can hold a steady RPM and throttle...

Redoing my harness in my 86, and there is pigtails i need to replace. Anyone have any good sites to look at for those hard to find pigtails? I looked at AM and LMR and they have the normal ones. Also will be looking at a company called waytek. Any input would be great!

I called 50resto and no luck,also searched the web and nothing. Anyone here have personal experience with the BBK O/R H pipe ? I'm trying to figure out if the same mid pipe will fit both a manual trans and also a 4r70 auto. Any help would be appreciated.

Is he still around here? If not can anyone get me in contact with him?

Droped my short block off at the machine shop. They charge $400 for assembly alone. What all is involved in assembly? Gapping the file fit rings and positioning them correctly on the pistons,and setting the end play of the crank? Installing the cam and timing chain set? Would it be worth it to...

351w 40 0ver,185 58CC afr heads,super vic intake,90MM accufab throttle body,60# injecters,76MM turbo right now i have 3.55 gears but will be changing those. How will this cam work with this combo?

Will a A9P from a fox work in a 95? I have a 4r70w with the bauman controller.

What auto shifter are you guys useing and post some pics of it installed.

You guys have anything going on in columbus next weekend? I will be in town would be cool to hang and meet some of you.

Looking at converting to roller cam. Im looking into anderson motorsports custom grind and also fti. So question is whats your opinion?! Please only give opinions if you have ran both cams or know someone that has that can litterially compare the two.

Looking for hp/tq numbers with the following combos.So with that being said i'm looking for 408 or 410w high compression and then if your spraying. Also looking for 408 or 410w turbo numbers. With the compression combo is it carbed or EFI? peace john:cool:

Well i know where its going to go, but IDC im looking for links and info on what all to delete from my 91 car to switch it to carb the correct way. Im in the middle of a build and want to switch from EFI to carb. I looked and didnt find anything about it. Dont want to do a hack job looking to...

Picked up another coupe to build. Its a 91 SSP washington car. Came with a 4r70w with bauman controller,03 cobra brakes upgrade,95 booster,93 M/C, 99 cobra wheels,smoked tails and headlights,8.8 with 3.55,diff cover,alloy hardened axles, grey/black near mint interior conversion,BBK CAI,magna...

How are you guys mounting the wiper motor when putting them inside the cowl? peace john:cool: