Search results

  1. TheDamned

    Overheating issue.

    Hi, It's very warm around here today so I decided to turn on the A\C. It wasn't blowing cold air at all when I saw my temp gauge to the top, I stopped right away asap. That's when some prestone started to come out of the radiator cap. I said to myself oh well time to put some prestone in...
  2. TheDamned

    URGENT! Overheating issue.

    Hi, It's very warm around here today so I decided to turn on the A\C. It wasn't blowing cold air at all when I saw my temp gauge to the top, I stopped right away asap. That's when some prestone started to come out of the radiator cap. I said to myself oh well time to put some prestone in the...
  3. TheDamned

    Saleen 2010 Saleen S281 pictures

    I like it.
  4. TheDamned

    Pulled the codes, help.

    Just to give you an update Hissin, I tested the EGR diaphragm with a vacuum thing tester and the valve itself works perfectly, the diaphragm moves and hold the pressure. Now i've got two more thing to test, gotta install the EGR pipe that goes from the valve to the headers. If it doesn't fix...
  5. TheDamned

    Thermactor air system fault

    Yeah, I always suspected that something was wrong with this vacuum harness. I always hear a constant "pshhhhh" in that area. Since the plug is pretty close from the motor oil entry I know the harness if very oil'ish and therefore probably leaking. I'll clean it with brake cleaner and put some...
  6. TheDamned

    Thermactor air system fault

    This ? Thanks
  7. TheDamned

    Thermactor air system fault

    Allright, thanks again guys.
  8. TheDamned

    Thermactor air system fault

    314 R Left Thermactor Air System inoperative What the heck is this ? I got this code. Thanks guys.
  9. TheDamned

    PICS! Different questions related.

    Thanks guys. Do I need to get under the car to plug it back ?
  10. TheDamned

    PICS! Different questions related.

    Hey guys, I'm chasing my EGR Valve problem and I got a couple questions all related to the pics here: #1 pic: I broke this thing will trying to unbolt a pipe below, it was fixed with the screw that you see there before but the plastic broke off! This thing is right beside the throttle...
  11. TheDamned

    Pulled the codes, help.

    Hi Hissin, Thanks for your prompt replies. Is there any "test" pins available for the sensor signal on the EGR ? I don't see how I can test the sensor signal when the EGR is functioning and plugged... I'm in electrical engineering so I know how to take voltages readings BUT i would've to...
  12. TheDamned

    Pulled the codes, help.

    Following that logic my EGR is working A-1 then since I have NO idle problems at all but I still have the EGR Insufficient flow code. I'm gonna order a new pipe (the ones that goes from the header to the intake) that was previously leaking, maybe that's what causing the problem, i'll keep you...
  13. TheDamned

    Pulled the codes, help.

    Thanks alot Sir. Ummm I think I pulled the vaccum out and the idle didn't change, would that mean that my EGR Valve is either stuck open or closed ? I'll re-try this.
  14. TheDamned

    Stalling issue - no more!

    Et voilà! I'm also working on an EGR issue (see my "Pulled the codes, help! thread) but mine is having insufficient flow but I don't have any idle problems... still chasing here. good job.
  15. TheDamned

    Pulled the codes, help.

    Hey man, The error code is 332 "Insufficient flow"... I mean I took off the EGR valve and how i'm supposed to know if teh diaphram is working ? That thing is INSIDE the EGR, I tried to blow\suck air (with my mouth) in the vaccum hole and it didn't do much. The pipes looked pretty clean to me...
  16. TheDamned

    Pulled the codes, help.

    Ok guys, I pulled out my EGR module today to see what's up. Thing is, I broke the pipe that goes from the headers to the intake... it was rusty as hell and it broke when I was trying to unbolt it off. Anyway, check the EGR and the tubes were pretty much clear, some carbon by the sides but it...
  17. TheDamned

    Pulled the codes, help.

    Gotcha, thanks alot for the pictures! Any other inputs ? Thanks guys
  18. TheDamned

    Pulled the codes, help.

    Where are they located exactly on the passenger side ? Thanks alot and sorry for the noob questions.
  19. TheDamned

    Pulled the codes, help.

    No exhaust leak as I know of... How do I check for the infamous vacuum leak that I always hear of ? Thanks alot guys!
  20. TheDamned

    Pulled the codes, help.

    Just to help you guys, I have stock exhaust system except a MAC O/R H-pipe, the 02 sensors were installed with the h-pipe. Also, I have a steady idle at ~800rpm. Now, few questions. I got these: 172: HO2S sensor fault/not switching, or fuel system at adaptive limits. 176: HO2S sensor...
Top Bottom
Back
Forums
Menu