Search results

  1. S

    Failed My Georgia Emissions

    Better then the first just the lower 15 mph I failed now any ideas. The one thing I did forget to do was the tire pressure and I set the timing to 4 to 5 hard to really tell on the old damper.
  2. S

    Failed My Georgia Emissions

    I Failed my Georgia Emissions test today anyone have any ideas. My Wide Band shows in the 15 range at the RPM range. I do have a set of cats on but smog is off
  3. S

    351w Swap

    If I swapped my 302 for a 351w don't know carb or efi yet could I use the stock hood.
  4. S

    Anybody using springs from Dynamic Racing?

    I have them on mine no problems like them allot just the right amount of drop.http://www.youtube.com/watch?v=Jp4N7mv_72s this is a vid after i put them on
  5. S

    Hookin you up.

    very cool thanks
  6. S

    Surging / bucking at low speed / RPM

    Mine did that when my FP was off
  7. S

    rebuilt 302

    what country are you in
  8. S

    so you guys are gonna kill me... (pics)

    Don't change a thing nice find
  9. S

    Timing

    Yes im doing it with a light I have been trying to get my idle down lower. So im going over everything tps idle screw FP. When I first started it was at about 900 then I get it set at 650 to 700 but when I plug the IAC back in it goes back up.
  10. S

    Timing

    Sorry Before top dead center other after top dead center, Should the rpm's go up when you go from btdc to atdc
  11. S

    Electric fan install help!!

    Dont know what a 94 fan pulls at startup thats what you have to figure out. Once you get that just go a little bigger on the fuse.
  12. S

    Timing

    If I turn the distributor counter clockwise does that make the timing go from btdc to atdc. Also when I do turn it to atdc the rpm goes up is that right.
  13. S

    2.75 blower pulley?

    Thats what im thinking.
  14. S

    Vent

    If you leave off the hose on the oil filler will that introduce un metered air thru the pcv.
  15. S

    Thermostat Will NOT Seal PITA

    I had the same problem as greensvt 21 I wanted to shoot the thing.
  16. S

    2.75 blower pulley?

    seems a little more sticky makes the belt fell softer.
  17. S

    2.75 blower pulley?

    Im running a 2.75 on my novi 1000 now with a power pipe i get 10 psi.Iit gave me about 2 to 3 psi more prob more on yours. It does have more belt slip but it will get to full boost. Sometimes it holds at 10 then drops off for a sec then right back to 10. I did try to put some belt dressing on it...
  18. S

    just got pics from the body shop!!!!

    do you have a before and how much was it
  19. S

    Here's a little teaser....

    Where are the pics
  20. S

    wasnt too satisfied with the first drive.

    You should be able to tell maybe a timming issue.
Top Bottom
Back
Forums
Menu