Search results

How many wires are going into the Self-test Connector to check for codes? When I got the car there was 3 wires going into it with another one just hanging there, so I put it into one of the ports, but I think it was in the wrong port because when I took my car to get tested, their tool...

My car is driving me crazy right now and i was told that it may be the EEC relay but it isn't where i was told it should be, so could somebody please tell me where it is? Thanks

I just finished installing my new Trick Flow Street Heat intake, MAC 70mm TB and MAC 70 mm Spacer and now I have a few problems. -First off, when I first turn the car on after it's been sitting for 8+ hours, it acts like it doesn't want to idle, it's twice as worse when it sat for about 17...

I just got my new Street Heat intake and I planned on installing it this weekend. While looking over the instructions, it said that I might need an extra foot of 3/8 in. vacuum line to relocate the PCV valve. Do I need it for this setup, because it said only for certaion models? Thanks

I can get a good deal on one from a buddy of mine and I was wondering if anyone has experience with them. :shrug:

For some reason, my TFI Module, (I think that's what it's called, the little plug coming out of the distributor), is so far clockwise that it is touching my radiator hose. Now I know that this is not normal but when I tried to advance it a little (turn it counterclockwise) it started running...

I don't know if this is normal or not, but when I turn my 89 5.0 off, I keep hearing a clicking sound from the number 6 cylinder (driver side, 2nd from the front). Is this normal, and if I pull my valve cover off that side, would I need a new gasket? Thanks P.S. My car is really slow

Well actually it gets really close to stalling only after it hasn't been run in a while, like after school or especially in the morning. It used to only do this once in a blue moon, but now its everyday. I've cleaned the IAB Valve a couple of times but this only fixes it on the start-up...

This is probably one of those stupid questions but o well... Right now I'm doing a tune-up and finally got to the distributor. I pulled the cap off but I don't know how to get the rotor off, please help. Thanks

I finally decided to check my timing, so I borrowed a Suntune (Sunpro) DC Power Timing Light, model CP-7520. This isn't inductive(?) I think because it doesn't clip over the plug wire. It has a little spring thing about 2.5 inches long that looks like it might go between the plug wire and the...

I finally went to the track to establish a baseline before I mod my Stang. My best times were: 60' : 2.312 1/8 time : 10.030 1/8 MPH : 69.61 1/4 time : 15.596 sec. 1/4 MPH : 88.92 MPH I know this isn't blazing fast, but do they seem...