Search results

  1. J

    Late model seats

    I have '94 Mustang seats in my '68 - previous owner did the installation. I believe all you need is the rails from your Mustang and bolt it on the newer seat bottom frame. I am not sure if there's any drilling involved. <img...
  2. J

    Leaf spring recommendations and advice

    I also have 620 1" drop coils - I have 5 leaf mid-eye springs from Laurel Mountain Mustang. It sits pretty level as you can see in the picture. <img src="http://forums.stangnet.com/attachment.php?attachmentid=32132&amp;stc=1" border="0" alt="" />
  3. J

    Driving me NUTS!

    No Mods except for air silencer removed - pretty much stock. Mine doesnt surge when slowing down. It idles fine when stopped, doesn't stall at all.
  4. J

    Driving me NUTS!

    My "Check Engine light" isn't on at all... so should I check with code scanner? I am trying to determine if it's worth $$ to buy the code scanner.
  5. J

    Driving me NUTS!

    I carefully cleaned the MAF with ethyl alcohol & Q-tips - no difference. I checked the EGR - the diagram moves freely with vacuum pump. Very little carbon build-up. Replaced the EGR Valve postion sensor - still no difference. Should I replace the TPS? I am getting frustrated and getting...
  6. J

    67 Strut rods considered lemon?

    I was told by a retired mechanic that 67 strut rods on Mustangs were designed poorly - I am not sure if this is true. I have looked in Mustang Catalogs - there are strut rods for 64 to 66 and 68-73. The 67's are competely alone. Does anyone have real story on this?
  7. J

    Driving me NUTS!

    Guys, thanks for your inputs... I'll keep you posted on what I find when I get a chance to work on it.
  8. J

    Engine combo & gear ratio suggestions?

    Guys - thanks for your opinions! It helps a lot. :D
  9. J

    Driving me NUTS!

    That's certainly strange about ABS affecting your engine performance... Are you sure there's no short with ABS wiring?
  10. J

    Driving me NUTS!

    No, it idles great & smooth, doesn't hesitate when I take off. No underdrive pullies - pretty much stock.
  11. J

    Engine combo & gear ratio suggestions?

    I have a 302 that was rebuilt by PO - Edelbrock Performer intake and 600 CFM Edelbrock Performer carb, with Performer cam (mild). Has Hooker competition headers, with 3" collectors, adapted to 2-1/2" dual exhaust. I have wide-ratio Toploader (1st gear 2.78) and 9" rear with 2.75 open. I have...
  12. J

    Driving me NUTS!

    thanks for the tip... anything else should I check in case this doesn't solve the problem?
  13. J

    Driving me NUTS!

    How would I determine if the EGR is faulty?
  14. J

    Driving me NUTS!

    Wouldn't using a carb cleaner ruin the MAF??
  15. J

    Harmonic Balancer

  16. J

    Driving me NUTS!

    My 94 GT has been missing/bucking at partial throttle - usually between 1200-1800 rpm. I have replaced ECT and O2 sensors. I've cleaned IAT sensor. New Air Filter, New Spark Plugs (only 3 months old) and 20k miles on spark plug wires. Replaced MAF 20k miles ago. At WOT, it takes off smoothly...
  17. J

    just testing

    :D
  18. J

    just testing

  19. J

    Free Play Rear end??

    My first thought ... thanks!
  20. J

    Free Play Rear end??

    U joints was my first suspect... but I've checked them out, seems to be in good shape. No clang when put in gear... just vibrations while going straight, mostly noticeable around 1500 rpm... regardless of which gear.
Top Bottom
Back
Forums
Menu