Search results

i had a 393 stroker fall into my lap basically. i can also get some fms swap headers for a 351 for free. i did some quick searches online, how horrible are these really if anyone has used them? i haven't seen them in person. appears they are 1.75 primary to 2.5 collectors? i was also told they...

fox has been on jackstands for 4 months now. keep getting issues with the new engine, so some changes had to be made for the daily driver. what better then another 5.0? :shrug:

i have a situation. im looking at possibly getting an electric WP and manual steering. should i go to this route.. i will be able to remove ALOT of clutter and weight off my engine bay. ps pump, lines, brackets, ac pulley, smog pulley, tensioner, wp pulley, heater tube, heater core hoses, wp...

i have had multiple projects over the last year with this car.all of them have taken me like 1-2 days, not much of a project.. well this one im calling snowball cause it keeps evolving and evolving. i had my 302 h/c/i, vortech si-trim setup making 440/410. i got my fuel issue settled and...

i have searched for awhile now, using lots of different word patterns with no luck. seen lots of the same question, with a response of "it's different".. well no chit. i got the sn95 booster in the car. i'm not taking it out to run to the hardware store... lets just say that :D. i have...

im going to do something for a remote catch can with my new engine build. i have some hefty ass an fittings already welded into my valve covers. they are like -12. i can't find any tanks online that aren't huge, like 18" height that use DUAL inlets. is there a certain site some of you use...

i just purchased an r302 block, 308 longrod shortblock. it will be revved to 6500. currently i have a stock bottom end, tfs twisted wedge heads, tfs 1 cam, systemax intake and vortech si-trim. at 7 lbs it is making 440/410. i am aiming for efficiency and function here. i will be swapping...

i have a baer sport brake kit on my notch. 5x4.5 pattern, 12" rear disc, basically uses 95 style corvette stuff. it came with cables for 87-92 cars, they are too long. i ordered and waited 7 weeks for the 93 mustang specific length cables, they are even LONGER. i went through everything with...

i have an sct 4 bank chip on an a9l ecu. LOONG story short, it is not fitting "tight" to the ecu board. when i hit hard bumps, or shut my passenger door, it causes a major disruption to the car. some of you saw my in-car video a few weeks ago. that was results of the chip being loose. we made...

i run out of fuel with my car from roughly 5300ish on. my airfuel is dead nuts across the band, then from 5300 on it just tapers leaner and leaner. it is not super lean, but not safe to stay in it. here is my setup; 42's, matching maf, 255 lph high flow pump, stock fuel lines/rails. i'm...

i have major fuel issues, see video.. the entire time the car is held to the floor trying to limp it home from work. the wideband and the nasty nasty on/off power are audible and visible. this happened from the car running normally after i simply moved the ecu from the passenger footwell back...

i just resolved my horrible driveability issues, (atleast the loss of power thus far) by putting my msd distributor back in. the msd distributor was pulled because after one year the shaft bearing has worn out. it has some slight wobble when the fingers spin and 3 of them are touching the...

i'll try to keep this simple so it makes more sense. this started leaving my dyno tune appointment. car dyno'd, drove great off the dyno. i headed home, 15 miles in the car does 2 big surges like i let off the gas and got back on. instantly after, my pedal becomes irresponsive. i look at my...

Ford Racing M-6392-C Ford Racing Universal Safety Bellhousing anyone used the ford safety bellhousing? i can get one for a good price new, i want to run this now that im making decent power. i imagine a bellhousing is pretty much a bellhousing, but i want to check before i am into this crap...

i inherited a baer rear brake setup on my rearend. it uses 95 style corvette brakes, i was also given the mustang specific e-brake cables. being that my car is a 93, the cable length is different then the 87-92 models. i ordered the 93 specific cables from baer. the 93 cables should be...

my oem contour dual fan recently (so i thought) went out. i ordered a dorman replacement for the contour. it clearly doesn't flow as much air, the car runs 10-15 degree's hotter. we are nowhere near summer weather yet. basically after seeing the temps hotter, i want to maximize my cooling system...

race season is coming again, i want to get some 555r's to run around the street with and to have better 60' times when i race. it costs me $40 more to just get entirely new rims/tires in 17s over just getting 2 rear tires/necessary parts for my 18's now. i have had saleen's on 3 cars now. i...

i had my car dyno tuned via sct 4-bank chip. it has always idled good, warm start, cold start, whatever. out of nowhere it started to develop a slight rpm drop and faint surge when pushing in the clutch and rolling. now it has gone full blown nightmare, and i have tested everything to no...

check out my new "recardo's". picked these bitches up for 350 for the pair. per groverdill who was my inspiration for wanting these exact seats, you need corbeau rails and drill your own holes to mount them. i run a cnc plasma cutter for a living. so i just jumped on cad, drew up a rectangle...

i have a 93 coupe and i want the tilt column. i have done reading on this, its a straight forward swap from what i gather. people keep complaining about the fitment of the dash parts, i no longer have any pre-90 dash parts to compare the fitment onto my dash now. does anyone have a pic of...