Search results

  1. MT1083

    A click noise when braking...

    I haven't been able to check it out yet, but I'd like to get some opinions before I go ripping into everything to figure out what it is. I installed cobra calipers about a year ago. Then about 1 month ago I started to hear a distinct "click" once the vehicle comes to a complete stop. I only seem...
  2. MT1083

    Anyone here with a Dell Axim X3 PDA?

    If there is anyone here with the mentioned PDA, I was wondering if I could at all trouble you for some help. I had this PDA for a few years up until about a month ago and I think it was stolen. I still have a current backup on my computer of what info was on it. My father has an Axim X5 that he...
  3. MT1083

    Quick T-45 Q...

    I did a few searches but for some reason I'm drawing a blank. I need to know if a T-45 from a 00GT will swap into a 98GT. I think I found that the 98 uses a mechanical speedo...so that may be a problem. Is that the only thing or are the tail housings different too?
  4. MT1083

    problem with upr control arms

    I'm doing all of my rear suspension right now and I've run into another problem. I was told by upr to reuse my factory lca bolts and nuts. One problems though...they won't fit into the holes of the bushings. The hole in the bushing is too small in diameter. Anyone run into this?
  5. MT1083

    Shock Help Quick!

    I'm installing my Bilstein shocks now and the top nut won't torque down because the rod that is threads onto keeps spinning. The dust cover is already on and I don't see any way to tighten the top nut without the dust cover already on. How do I keep the rod from spinning so that I can torque...
  6. MT1083

    Difference between Billet/Forged/Cast

    What are the differences regarding the way that rods are made using these methods. I know that both are stronger than cast but I was just interested in know how the 3 are made and what makes them stronger than the other.
  7. MT1083

    Cobra Brake Upgrade?

    I've been looking at the 13" kits from mustang tuning and steeda and I was wondering which cobra's do these kits come from (at least the calipers anyway)? Or are all the cobras the same including the 03/04 models? It seems like mustang tuning will be the cheapest considering the free shipping...
  8. MT1083

    Smog Q? Maybe for bdcardinal?

    I've never been given a good answer on this but why won't (in most cases) a catted x or h pass the sniffer test? I have a Bassani catted x that had won't pass inspection when I have to go next. The only time it passed last time was because of a buddy at the shop. It makes my car run a bit richer...
  9. MT1083

    Jacking Rails

    I never see anyone mentioning jacking rails and there are no threads that really have a lot of info about them. I was just wanting to know if anyone had any comments on them or any experiences. I just ordered the Kenny Brown rails today and I'm hoping they will make it easier or at least more...
  10. MT1083

    H-pipe Q?

    Does anyone know if the stock midpipe for an 01 GT would be a direct swap for an 00 GT? I was a dummy and sold mine when I installed the x-pipe, and I'd like to have the stock H in case I ever have to swap it back out.
  11. MT1083

    Hood Shocks

    Just wanted to say that I received my hood shocks from Redline Tuning last night and I went ahead an installed them. They work great and I highly recommend them. The install took about 1.5 hrs (I was lazy). The only thing I had trouble with was attaching the strut to the fender. You must keep...
  12. MT1083

    Went to the Dyno

    Well I finally went to the dyno this past weekend and I'm pleased with the results. The numbers are as follows: (SAE) Pump gas mode 381.2 hp @ 5800 408.5 tq @ 3500 (SAE) Race mode 394.5 hp @ 5800 413 tq @ 3500 I actually believe that this dyno was showing the numbers a little low...
  13. MT1083

    Camber Problem

    I have a problem with my front tires riding on the outside edge of the tires. No matter how many times I have them realigned, they always do it again after a few months. I was wondering if this problem will lessen once I lower my car. I doubt it would but it never hurts to be hopeful. I would...
  14. MT1083

    Customer Service

    Just wanted to let everyone know that Houston Performance has excellent customer service. Awhile back they had sent me the wrong exhaust (one for Cobra instead of GT). Anyway after everything was said and done I still had the wrong exhaust sitting at home, and I've had it here for awhile waiting...
  15. MT1083

    Check for Exhaust Leak

    Is there any way to do this besides listening by ear? I guess I could shove a piece of paper or something flimsy up there to see if there are any gases coming out, but I would prefer to have my hands burn free. I have a slow response on my bank 2 sensor 1 02 sensor and I think the problem has to...
  16. MT1083

    Axle Question

    Is the Traction-Lok axle in our stangs the same thing as a posi? I've searched and searched but I can't seem to find an answer. A buddy of mine asked what comes on our cars but I've never really done any research on it. Can somebody help? :shrug:
  17. MT1083

    KB Done!!

    My KB is finally installed!!! :banana: :banana: All I had left to do this evening was fill up with coolant. Dan_Soprano had a really good idea on how to prime the IC pump. Remove the top hose on the IC reservior, pour in some coolant and then run the pump while blowing through the hole in top...
  18. MT1083

    Clutch Info

    Does anyone know of a site where I can get some good info on clutches and flywheels. I will be replacing them sometime soon and I don't know too much about either. I keep juggling between King Cobra, Centerforce, and Spec. I talked to some guy at Carolina Clutch and he told me that for my...
  19. MT1083

    Denso Plugs?

    What autoparts store carries Denso IT20's? I have been to a couple in my area and none of them carry them. The Autozone that I went to only had IT16's and advance autoparts didn't have any. Can you help me out here? :shrug:
  20. MT1083

    Subframe Question

    I am looking to buy MM full length subframe connectors for my vert. I noticed in their installation instructions that part of the connectors attach to the rearward bolts that hold your seat in. Will that be a problem if I ever need to remove my seats? Or can I still remove the seats without...