Search results

  1. bmorrisj

    I think my frame is bent, how much to fix? (pictures)

    make sure you got new motor mounts and they didnt reuse the old ones, mine are crushed as well as my right frame rail being bent.... its bad enough that my motor sits down and to the left as it is...
  2. bmorrisj

    rear disc 5lug questions ... ????

    http://svo73mm.cjb.net you can get a set of brackets so you can use sn95 brakes with the stock track width but the brackets usually cost more than sn95 axles.... http://www.northracecars.com/catalog/brakes/brakes.htm
  3. bmorrisj

    Roller Rocker Question!!???!!???!!???

    i believe they are pedistal mount, and your looking at about ~270/rwhp ~310/rwtq* *guesstimation
  4. bmorrisj

    Anyone have these same wheels?

    :rlaugh:
  5. bmorrisj

    What's the diff. between Pro 5.0 and pro 5.0 power tower?

    power tower is the stick that bolts to the pro 5.0 base....
  6. bmorrisj

    Caliper Slide Pin Bushings (Steel)

    http://www.maximummotorsports.com/sscs.asp
  7. bmorrisj

    How to change my fuel filter?

    its right in front of the fuel tank between the tank and the rear end, bell shaped with a hose on both ends....unclip the hoses, take it out, and do the reverse with the new one, mind the fuel flow direction.... wear safety goggles, you will get gas on you....
  8. bmorrisj

    cant lock up brakes after rear disc install

    did you upgrade the stock brake booster to a sn95, 93 cobra unit....
  9. bmorrisj

    Short Throw Grinding!

    your syncros/dog rings are going out...
  10. bmorrisj

    You paint Your Rims?

    i didmt paint my wheels, but i bought mine powder coated black....
  11. bmorrisj

    5 lug conversion ?

    if you use those axles, you have to go to disc, so you'll need:<for the rear>brackets, anti moan brackets, calipers, rotors, line adapters ;<for the front> rotors, calipers and brackets, brake lines<everything else>94+ master cylinder pref. cobra, 94+ vacuum brake booster, make sure its NOT a...
  12. bmorrisj

    Question on vibration in the trans?

    if you can hear the tranny whine too, its time to get some ATF fluid in there....
  13. bmorrisj

    Ticking....Gets louder when warm

    pull the valve covers....
  14. bmorrisj

    Coupe 4 cyl to V8 conversion... Worth it?

    its a coupe, a nice looking one for $1200??? a 5.0 coupe is never not badass....
  15. bmorrisj

    clutch fried at 700 miles

    get a 10.5" next time :rolleyes: :rlaugh:
  16. bmorrisj

    Brakes..?

    as far as i know the only way to go bigger rotors with stock calipers/hardware is with a baer eradispeed+1 kit.... but if you want to use stock rotors, i have a set of larger 73mm svo/mkvii front calipers for sale :nice:
  17. bmorrisj

    confused on this race...

    no offense, just constructive criticism....learn to drive.... and take it to the track....
  18. bmorrisj

    Stock tach that inaccurate?

    the dimmer wire is a white wire behind the a/c controls...
  19. bmorrisj

    Fuse to pull for compression test?

    or disconnect the tfi connector off of the distributor.....
  20. bmorrisj

    Help! Do I need CC plates?

    you need to do better than monroe(stock replacement) if your car is lowerd, those pieces wont be able to control the suspension very well on a lowered car... or if you dont mind feeling every little ripple and bump on the ground, from your tires not being able to be firmly planted on the ground...