Search results

  1. boostaddict5_0

    Got some power issues!

    Alright guys I'm stumped, I'm ready to get this beast running! Here's the problem I finally have power to the computer (jumping power), but the issue is that the 91-93 wiring harness has the fuel pump relay and the wiring is totally different then the pinout. I've posted some pictures so maybe...
  2. boostaddict5_0

    Got some power issues!

    Thanks for looking that up for me man.
  3. boostaddict5_0

    Got some power issues!

    Alright I'm scrapping the 92 wiring harness, there's just to much that has been cut. I going with a 89 wiring harness. The next problem is that I can't find the location for the neutral safty switch harness coming from the AOD. It's a 4 pin with the white/pink and red/blue. Is it in the...
  4. boostaddict5_0

    Got some power issues!

    found out it is a 92-93 wiring harness so I'm assuming the colors are all different.
  5. boostaddict5_0

    Got some power issues!

    I took on someone else's project which he pretty much cut up alot of wires. It's a 1989 Mustang hatchback chassis with a crappy 86 302 HO and a 1990 wiring harness. I finially got the car to turn over by key after finding some ignition wires had been cut. Now I chasing no power to the eec...
  6. boostaddict5_0

    PINKS all out Gainesville

    Looking to buy racer tickets..anyone not going to be able to make it?
  7. boostaddict5_0

    Boost Addiction's 1st Annual Dyno Day! 12/15/07

    Ok guys here's the run down of the event. Boost Addiction's Grand Opening/ Vehicle Dyno Day! Alright guys put you're coats on and come have some fun @ Boost Addiction! It's time to introduce Boost Addiction to Brunswick and surrounding areas with our Official Grand Opening on December...
  8. boostaddict5_0

    HELP!~~!!~!~

    Yes me and Serious did the swap
  9. boostaddict5_0

    HELP!~~!!~!~

    Alright I got the bypass done so now the car is running, but the transmission won't go into any gear. I went thru all the gears and came up with nothing. I messed with the shifter cable. I put the shifter into drive and pushed the lever all the way forward and came back three clicks. If...
  10. boostaddict5_0

    HELP!~~!!~!~

    Let me get some input on this.
  11. boostaddict5_0

    HELP!~~!!~!~

    Yeah it has to be the neutral switch. I got a toggle switch for the connector, and I'm going run it as a bypass. First someone told me to run some wires to the neutral switch then to the toggle, and split with one going to the battery then one to the starter solenoid. I'm just going to run it...
  12. boostaddict5_0

    HELP!~~!!~!~

    Update--Got the transmission on now everything is okay with the install on that side. Now to the starting problem. We're going to try and bypass the starter safety switch...we'll see what happens.
  13. boostaddict5_0

    HELP!~~!!~!~

    Yes we switched everything out. That's what I was kinda thinking also. Maybe theres someway to to cut that signal out? First I have to get this motor turning when everything is bolted down. I'm going out to look at the TQ and see if its pushed all the way back into the trans.
  14. boostaddict5_0

    HELP!~~!!~!~

    Hey Shawn I appreciate your help on this matter. Now here's the 2 problems that I'm having with the auto install. When tightning the transmission to the block the4 bolts to the torque converter and the weight on the flywheel are contacting the block dustcover, and the engine won't even turn...
  15. boostaddict5_0

    BLOWN AND STROKED

    I'm with Red...Go with either 42lber's or 55's. Get the 255lph fuel pump and a Fuel Pressure Reg.
  16. boostaddict5_0

    T-5 to Auto (Trades)?

    95vert-Yeah hopefully this deal with Serious will go thru, but if not i'll give ya a buzz.
  17. boostaddict5_0

    T-5 to Auto (Trades)?

    SeriousSN95- you've got a pm
  18. boostaddict5_0

    T-5 to Auto (Trades)?

    I finally decided to make the swap with my T-5 turboed 95. So if anyone with the same year model wants a stick in the surronding states of Southeast Georgia lets trade....Tell me alittle about your set up. Stock T-5 52000mi on it King Cobra Clutch Ford Racing Billet Flywheel BBK Adjustable...
  19. boostaddict5_0

    Quick question (computer)

    Black I totally know that I can't run a 4.6 program on my EEC :bang: I was just asking if my buddies Blue superchip would work with a T4mo reflash? I used to have the TweeCer RT. So that being said; the prongs on the back of the EEC are the same all the way up to 2004
  20. boostaddict5_0

    Quick question (computer)

    Ok then why will a TweecerRt fit on J3 ports 89-2004? http://tweecer.oplnk.net/viewtopic.php?t=5709&sid=9a43307c9a33bd91c3e1d93146a707d1
Top Bottom
Back
Forums
Menu