Search results

  1. jammer84_03

    Starter: 95gt into 89gt ISSUES!!!

    Well, i was having to purchase a new starter for my car anyways, and figured i'd go to a mini starter. I searched the issue and didn't really find any answers other than wiring one up. I got a reman unit for a 95gt and wasn't thinking about it fitting properly. Will i run into any unforseen...
  2. jammer84_03

    what color wire?????

    http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif now for the driver side sensor, there it a couple different color wires to choose from white with yellow, dark green with light green, black with light green. since its not listed on the diagram, what...
  3. jammer84_03

    billet power steering pulley

    well, i think i pretty much destroyed my power steering pump pulley, and i might as well get a lightened pulley that has some shine to it. i've looked in alot of places and i cant find one anywhere. i know i've seen them on show rides, and i even checked upr as they would be the most likely to...
  4. jammer84_03

    lots of electrical issues w/ wire hide

    well. i started off by blowing up my engine (dropped a valve seat in #1 and had to yank it). while i had it out i figured i would do a little extra by relocating the battery to the trunk with a taylor relocation kit, and also hid the wires in the fenderwell and completely going through and...
  5. jammer84_03

    what pistons for vic jr clearance

    well, i got a killer deal on a set of victor jr heads with pro magnum 1.7 roller rockers for 1g....couldnt pass it up. i know the heads have a 2.05 valve, and def wont clear them. i somewhat posted a question earlier about how to check for clearance, but now i think i might just get new forged...
  6. jammer84_03

    vic jr. heads...big enough reliefs?

    well, i am switching out heads and going with a set of victor jr. heads. my only issues it im not sure if the valves are going to contact the pistons at all. right now i have speed pro pistons: http://store.summitracing.com/partdetail.asp?part=TRW%2D8KH273CP30&autoview=sku and a comp cam...
  7. jammer84_03

    331 rod crank sizing

    3.25 for the crank and 5.400 rods for a 331 combo?
  8. jammer84_03

    coil on plug conversion

    been doing some serious searching on this topic as of late, but i havent seen any info on someone doing it. i have an aem ecu on te way, and i want to go to a coil on plug solution for my 331 stroker. i was thinking on going with their pencil style directly from the aem's website, but for...
  9. jammer84_03

    3g alt acting as bad as 2g!

    well. i just purchased a 3g alt and did the swap. i have the inline fuse and everything works. the problem is, when i turn on the lights, turn on the heat, roll both windows down it seems like the alt cant keep up with the draw and the voltmeter drops big time. i went and had the battery checked...
  10. jammer84_03

    map light electrical source

    well... im looking to hard wire my valentine v1 to the stang and i need to know if the map light can be used as the source for my hardwire installation? i believe i need a 12v source and instead of running a ton of wire, this would be a very stealth place to mount the RD and also put the wire...
  11. jammer84_03

    largest tb size on victor jr

    like the title says... i know the 75mm is what the intake is set for out of the box, but can it be opened up to a 90mm? or is it not that capable to be opened up?
  12. jammer84_03

    sn-95 a-arm upgrade

    well, heres the senario. i already did the 5 lug swap, and im about to upgrade the springs to the eibach pro kit all the way around. i have new urethane bushings im gonig to put up front as well, and mm lca's in the rear. now i was told to get sn95 a-arms for the front to go with the 5 lug i...
  13. jammer84_03

    control arm bolt sizes...?

    ok. im about to replace my bushings in the front control arms, and i know the bolts are prob rusted a lil and i am just going to buy new ones before i even have to worry about the condition of the old ones. also, the rear lower control arm bolts are worn out really bad and i want to replace them...
  14. jammer84_03

    can someone do me a huge favor?!?!

    i need to see how the starter is wired. and i need pics. i have mine wired incorrectly i believe and i need to see what terminals get the wires attatched. so can i have a huge favor and get some pics?
  15. jammer84_03

    anyone got the mini starter diagram?

    anyways...i broke my starter. i got a mini starter from a 95 gt laying around and now i got to figure how to wire it. i did the small in a big wire on the s terminal, and i did the big wire on the starter solonoid with the positive cable and the small wire to the opposite side and when i went to...
  16. jammer84_03

    HELP!!! tko600 crossmember not fitting

    ok...so i took out my old 3550 and got the new tko 600, now when i got it all bolted back up i go to put the trans crossmember up and it wont go up without bending the exaust really bad. is there a special crossmember that i ahve to buy to make this fit?
  17. jammer84_03

    c-clip eliminators

    im looking to do a complete rear end upgrade next week after i get me nex axles and diff and gears. the question being. i do alot of raod racing. and i heard elim the c clip will help with strength in the read end, but i heard it leaks fluid on hard cornering?
  18. jammer84_03

    tko 600 rr clutch

    well, as i posted before i blew up my road race version of the tremec 3550 :bang: . (anyone wanna make an offer on a tranny that need bearings and a third gear pm me. its got the road race spec gearing...great for the street) anyways im about to just pony up and get a tko 600 and get the road...
  19. jammer84_03

    frame rails?

    looking at geting some re production or oem frame rails to replace the ones on my gt. they are rotting away so i want to get em fixed before i have any issues. i know this is a huge problem with the fox stangs so i know they got to be out there. im going to hide my wiring while i have the front...
  20. jammer84_03

    input shaft mod?

    ok...so im putting a t5 from a 95gt in my fox with the bellhousing and everything. the input shaft is long from what i hear. can i take the input shaft off my tremec that just blew up off and put it on the t5, or can i get a input shaft from a parts store and put it on to temp fix the issue?