Search results

Hey everyone, check this out. It's my first time to edit together some clips, these have been on my camera for two years and I finally got the cable to transfer them to the computer. Check it out and tell me what you think! Enjoy the one wheel peel! Sorry bout the shakey parts...

Hey everyone, I'm thinking about getting a set of Falken Koblenz wheels for my 90 Gt. Is there anywhere that sells them in different sizes? Like 18x9 for the back and 18x8 for the front with correct backspacing? I think they would look really unique on a foxbody. I have factory length rear axles...

I'm trying to decide on the best fit off the shelf cam for my new motor. It's a 347 with mildly ported gt-40 iron heads. The car will have 3.55's and 5-spd and is daily driven. Needs to remain streetable but a nice lopey idle is just fine with me. No emissions to pass. Help me please!!

The post that holds the alternator to battery wire is getting extremely hot. After less than a minute of idling the post is hot enough to blister your fingers. There is also a clicking sound coming from the area and makes me think something is arcing. I don't know what to check. All grounds are...

I was having a grinding noise coming from my alternator after installing a new belt. I was looking around when i noticed the alternator's pulley slowly moves horizontally like its engaging and disengaging. When it moves out towards the fan a horrible grinding noise comes from it.......whats...

Two ribs of my belt broke off yesterday but the belt stayed on. I drove the car home because all accessories were still running fine. I got home and got a new belt 84.5 because i have smog delete. I put it on and everything fit good and tight. I started the car and it makes a grinding noise...

Ok, to start off my car has been running really terribly for a LONG time. About 75,000 miles long. It won't idle until its up to operating temp, makes popping noises at times (comes from passenger side of motor) and i only have a bbk cai bolt on. I just installed the bbk today. One thing I've...

I hope i dont end up making myself look stupid but how do you clean a bbk style fenderwell filter? Just use k&n oil and stuff? Or do you have to replace them every so many miles?

I need some more opinions. I bought an install kit, speedo gear, and 3.55 gearset all from one guy on ebay. Everything is great except something on the pinion gear. There is a small chip on one tooth and some rust forming on the same tooth. I dont have a pic of my actual one so i did some photo...

When i go to slow down and stop at a redlight some clicking noise comes from the back of my car. It only does it at very low speeds. Could it be something with the self adjusters of the drum brakes? I did do 5-lug conversion maybe its something with that? The noise starts fast but as i slow the...

Where can i go to get the 84.5" belt to bypass the smog pump? Autozone? Napa?

Ok i'm buying new tires for the front of my stang and was wondering about how to go about rotating the backs to the front? I guess all i do is move the backs to the front leaving them on the same side.......right? sorry if its a dumb question.

Ok everybody I know dynamat it and all that but where is a good place to pick some up for cheap? Any substitutes for dynamat that are cheaper? I'd really like to see some pics of some peoples work to see what i should do as well. Reason for the terrible shaking..................I just had a...

Ok, is there anything special i need for heater core replacement? Just the heater core, rtv sealant, and basic tools right? (and a weekend)

What do you guys think of my new wheels? www.cardomain.com/id/1990stanggt

Ok guys in the middle of 5-lug conversion. My rear tires are rubbing quad shocks. I have aftermarket kyb's so flipping them will do no good. Not really enough lug nut for a spacer. I dont have my old quads either. What should i do? I dont have alot of time to do something. BTW my tires are only...

Finally bought a code reader and ran codes. With KOEO test i got 32, 12, 22, and 67 but i know 67 is no big deal. With engine running i only got one code 12. Little tidbit of info, using a testlight, the wires going to the EGR only give a very dim light so I belive the wiring could be bad on...

Ok, what kinda gear oil should i get for my rearend? and how much? I've already got some friction modifier just need suggestions on kind of oil.

Well got the rockford 1001bd i ordered today and wired it up to my 12" L7. It is so much more powerful than the mtx801d i had before. 3000 watts max power at 2 ohms. 1000rms. Class d......can you say :drool: lol But like i said it absolutely destroys my sub if i turn it up louder. At this point...

Last time i tried doing the self test for the eec i fried it. I know what i did IF it was my fault though. I found the big connector for the eec test but just overlooked the small 1-pin connector. So i searched around in that same general area and found another one pin connector.......i jumped...