Search results

  1. 2

    Dyno results , stock engine , vortech low boost kit 343RWHP 411RWTQ

    Engine is stock , E7s , stock cam , only modifications are GT40 intake , longtubes with offroad Xpipe , C&L 73mm MAF , 30lbs injectors , Trex pump and Vortech low boost kit 5-6lbs 343RWHP 411 RWTQ Tuned using Moates Quarterhorse
  2. 2

    Vortech kit with Ford AC delete kit

    I have read all kinds of post about running the Ford AC delete kit with the vortech kits and saw that vortech has a kit that relocates the tensioner all together but I personally think it does not keep a stock look to the car so I came up with a better idea , Used a 840K6 belt , other people...
  3. 2

    95 cobra , 306 HCI tuning before and after

    95 cobra built 306 AFR 185 heads trickflow R intake, F303 cam Before tuning 255rwhp 278rwtq After dyno tuning 314rwhp 324rwtq might have little more in it but fuel pump is believed to be going bad , he is going to bring it back after changing fuel pump
  4. 2

    Dyno numbers 331 Trickflow / procharger

    331 DSS stroker Trickflow top end kit stage 2 cam , D1SC procharger 11psi , Detuned to stay under 500 rwhp so it doesnt split the block , tuned with Moates Quarterhorse 475 RWHP 483 RWTQ
  5. 2

    01 GT with 5.4L DOHC and 03-04 cobra blower

    Just thought I would share what I get to tune in a couple weeks , I put a start up tune on it Saturday so the FR500 cams can get broke in and drive it around to seat the rings before we put it on the dyno Alot of work has went into this , and guy wants to see if one of the...
  6. 2

    Reasons for tuning with correct data

    Previous tuner had loaded completely wrong data in the tune and hacked the MAF transfer to add fuel on top end , but the car was really lean at part throttle and tip in , look what loading the correct data in the tune did , picked up 53 RWHP and 68 RWTQ at 4000 rpms and even more below that over...
  7. 2

    95 cobra , code 564 , help ?

    I have done pinpoint test and I get to a point where its telling me to replace PCM , well I did that and guess what , still no fan , all wiring between PCM and CCRM is good , CCRM is new , PCM is new well (remanufactured) I run pinpoint test with new PCM and says replace PCM , what are the...
  8. 2

    Underdash connections/ need help

    Can someone tell me where these plug into Drivers side , on center console side Passenger side , far end of dash comes out beside glove box hinges
  9. 2

    Procharger HO kit for 99-04 GT $3000 shipped

    Kit only has 8K miles on it , car was automatic and driven by 60 year old woman so it was not abused 8lbs of boost , 2 core intercooler , included with kit are stock 99-04 MAF , 42lbs injectors , all piping and bolts , clamps and brackets to install What you will need with it are focus...
  10. 2

    Putting dash back in , need wiring help

    I have a pigtail on the drivers side firewall that I cannot find where it goes , it looks to be part of the headlight harness , its a gray pigtail and appears to only have two wires , its facing straight up but I cannot find a wire that connects to it , I will try to post a pic later tonight but...
  11. 2

    Used but unlocked SCT SF3 tuner $330 SHIPPED

    330 shipped , email [email protected] for details
  12. 2

    393 or 408 with 76mm turbo

    I am about to build a mild 393 or 408 for turbo setup , going to run Edelbrock performer RPM heads, Lightning intake with 93 cobra upper , 9.5 compression , with a precision 76mm turbo .......with probably a .550-.575 lift cam , what you guys think this will run and or dyno ?? Anybody got or...
  13. 2

    Sniper + JLT II intake MAF transfer function

    just an update to this thread for any 2005-up GTs here wanting to go with Sniper and a JLT intake JLT II intake Base MAF transfer function for Sniper software in KG/HR for the 2005-up GTs volts KG/HR 0.0327549315989017 0 0.5279999971389770 14.585131 0.6079999804496770 17.458202...
  14. 2

    Tap size for coolant sensor for PI swap ?

    What size tap is needed to tap the second hole for the aluminum crossover for the second coolant sensor ?
  15. 2

    04 V6 , how much compression?

    I was wondering what the stock compression should be on a 04 V6 when checking with a standard compression gauge ?
  16. 2

    Should I paint my timing cover black ?

    Just painted my block new ford blue , stock valve covers and oil pan are black , thinking about painting the timing cover flat or semi black to match ? what you guys think of doing that ? anybody got pics of an engine with a blacked out timing cover , I saw one on a mach1 a while back but cant...
  17. 2

    swapping fox wiring into 94-95GT ???

    I can trash just about everything under the hood right ? Anybody done this ? Can the IAC and TPS wires just be spliced and soldered to the 94-95 pigtails ? What wires do I need to keep in the car at the PCM to get power to it ? and what wires , relays , etc. can I get rid of ...
  18. 2

    OBD2 conversion thread/ 95 GT ecm to 96F150 computer

    I am getting the ECM today out of a 96 F150 5.0 5 spd , then I have to find an OBD2 port , and the plan is to re pin the ECM plug on the car for the truck ECM and then run the 11 or so wires to the OBD2 port and that way I can use Snipers Special Forces to tune the car , it has a 331 stroker...
  19. 2

    94-95 gt computer pin outs ?

    anybody got a detailed wiring diagram of the ECM of one of these cars , I am thinking about using a 96 F150 computer , and OBD2 port wiring etc . to change one I am working on over to a newer computer so I can datalog thru the obd2 and give me the ability to flash tune the car .....
  20. 2

    Patriot heads ?

    Anybody running these heads with a blower on a stock engine ? if so what kind of cams and what kind of numbers are you putting down ?