Search results

  1. L

    2013 Fusion Se Erratic Turn Signal

    My gf bought a brand new Fusion last year and it's spent more time in the dealership for issues then she has actually driven it. Like always the dealership can't figure it out, so I'm hoping someone on here might have some insight or have gone through this and had it properly fixed. The left...
  2. L

    Power??

    Oh geez, well then looks like I will need to look into nitrous kits. The GTO was dynoed and it came out to be 330 to the wheels. The GTO is a tank so I was hoping that the power to weight ratio was going to be on my side (granted I know the vert is a tank as well).
  3. L

    Power??

    Hey everyone, I'm looking for some opinions on what you guys think I might be pushing for power numbers. My car is just about complete with everything listed in my signature, right now I have just been finishing buttoning up all the connections and what not with putting in the new motor...
  4. L

    Cylinder Head CC's

    Hey everyone, I have a set of heads that one of the heads combustion chamber is one (1) cc lower than the other head. When the heads are bolted onto the motor would this difference create any problems? Thanks for any input.
  5. L

    8.8" rebuild cost

    Full rebuild including new gears would be about 6 -700 Full reuild without gears would be able 4 - 500 My rearend with buying new gears was 650
  6. L

    tfs1 cam

    I dont have a scanner but here is all the info from the card. TFS-51402000 Valve Setting: Intake .000 Exhaust .000 -------> HOT Intake @ CAM 312 @ VALVE 499 ROCKER ARM RATIO Exhaust @ CAM 319 @ VALVE 510...
  7. L

    MM K member

    TTT
  8. L

    MM K member

    Hey everyone, I'm looking into ordering a MM K member set up and I just have a quick question. Does anyone on here have the MM k member kit with the stock geometry arms and 17" Rims? I'm curious as to if the 3/4" forward movement will cause the wheels to rub. I did a search but didn't come up...
  9. L

    Choosing an Intake???

    Alright thanks tmoss, I will stick with the Cobra.
  10. L

    car steal engages when the car is turned of

    Those sentences give me a headache.
  11. L

    Choosing an Intake???

    Hey everyone so I dug up this tread again for opinions again. I have been slowly putting the motor together and re-doing my engine bay over the fall and winter. Well over this winter I came across a set of really nice Edelbrock Performer heads that are milled down to a 58cc vs. the original 60cc...
  12. L

    Stock Valve Covers

    Highly dout it. I tried it once and the rockers hit so bad, but I guess it might vary with rocker brand.
  13. L

    X2 ball joints, UPR K-member and 96 A arms??

    What they said ^
  14. L

    Did I screw up my pilot bearing?

    Better to be safe then sorry, with the bearing being cheap I would just replace it.
  15. L

    New Guy Here!

    Welcome, what do you have for the current mustang that your able to get serious with?
  16. L

    upr k coil overs wheel rub?

    I would like to know more about this as well, cause i'm leaning towards going to a upr k member set up as well.
  17. L

    harmonic balancer

    I want to say that if it's a factory 302 then its a 50 oz balancer and flywheel, the factory 351's use the 28 oz balancer and flywheel. I'm pretty sure thats how it is.
  18. L

    Should I Replace Explorer with Cobra Intake?

    Oh, Is this problem only on the aftermarket Cobra? I am curious because I have a aftermarket off road GT-40 lower intake with an original upper. What is the deal with the baffle is it just to small? The baffle on the lower I have extends from the back to half way up the manifold. Is oil...
  19. L

    Should I Replace Explorer with Cobra Intake?

    What is the big difference between the Chinese made and original Cobra intakes? Is there an issue with both the upper and lower?
  20. L

    5.0 won't start

    Is the starter clicking or the solenoid? I dunno how automotive savy you are so if that was jibberish to you, is the clicking coming from the Drivers side fender right behind the battery, or is it coming from down on the bottom of the motor on the passenger side?
Top Bottom
Back
Forums
Menu