Search results

  1. M

    How bad is spraying off the line?

    This is from The NX guru's and I launch mine from the line, controlling wheel spin is more the issue. 2001 V6 running 75 shot Take it for what it's worth... The RPM level is not as important as is the motors ability to rev freely when the nitrous is engaged, I.E. If the vehicle is in low...
  2. M

    Exhaust Sound Off Competition

    As far as Sound (db) we had 2 6ers :hail2: in the top 5 and with judges choice we had two in the top ten (8th) ... LsRedy2Kstang check me on the vehicles ...not sure which Al had the lightning 8 travis 592.6 610 1,202.6 V6 10 al 570.2 620 1,190.2 cobra 4 todd 570.1 600 1,170.1 cobra 9 jc...
  3. M

    Simple question... need opinions

    Agreed....Our Group just had an exhaust sound off, of the 2 6ers there, Mine with Flowmaster 40's and GT cats ... was completely blown away by the Mac set-up o fthe other 6..matter of Fact he blew away all Cobra's on the Db meter ..Too Cooool. If you decide you want to go with flowmaster's...
  4. M

    Help! Brake swap -> 01 GT to 95 V6

    2 cents if it helps to look at all options ... When I upgraded my 01 v6 brakes to 13" I then took the 2 piston (01's) from that car and put them on my 96 V6(replacing the single piston) Everything was a direct bolt up except The Brake line had to be adapted at the point where the hard line...
  5. M

    why mod a V6?

    man 90K .... ! but in making a short story long that is my My goal as well... since the only thing seperating mine from a stock gt is the missing two cylinders and with cam and head porting along with all the bolt ons.... I'm in close pursuit to those 99+ gt numbers. other then that... in...
  6. M

    8.8 Rearend w/gears

    I got mine for $400 which i beleive is pretty reasonable off a quick sale. It had 3:27s Couldn't find one already set up with the gears (did find some 3:73 in the 600 range) so I spent 189.00 on the 4:10s .. I did the gear install myself so don't know what labor runs there. The biggest PITA...
  7. M

    engine pitcure needed

    I've got one that shows probably what your looking for. I took pics when I changed out valve covers and had it tore down to the lower intake. I guess your talking about the little electrical piece ( 1" x 1" ) that bolts to the lower bolt on the coil pack closest the windshield ? If you...
  8. M

    Place to buy hood

    What exactly are you looking for ? If your refering to a stock hood I have a 2001 (without the hood scoop) in Tropic Green, in near perfect condition.
  9. M

    a Mustang with euros

    so in order to perpetuate an already over drawn thread, what is the feeling about after market seats like corbeau, dad etc .... I hate the stock seats ....
  10. M

    engine pitcure needed

    can you see this attachment coil1.jpg ... what exactly do you need to see ?
  11. M

    serpentine belt routing

    Lsred.... are my attachments / pics working ? and why is the local group so quiet ?
  12. M

    serpentine belt routing

    try this
  13. M

    Throttle Body Sug. Help!

    I had my car down with the guy's at Supersixmotors this past Friday and we did a three pull dyno and discussed some future mods i am going to do next month. (2001 coupe, auto) They backed up the 5.0 magazine article that the 70mm throttle body I have installed could actually be hurting...
  14. M

    dumb rear sway bar question...

    the response was about changing springs and the sway bar. You CAN replace rear springs WITHOUT removing the sway bar. Sorry I was just trying to keep things straight , i re read the original post and noticed you said the instructions called for. I've never had to.
  15. M

    dumb rear sway bar question...

    I have done my 96 and 2001 springs a few different times. but was curious why the thought was that you have to remove the sway bar to do springs ? didn't either time on the 96.
  16. M

    Pulleys

    I thought this was going to be hard one but turned out to be somewhat easy, I already had the puller and just got the longer 14 mm bolt to install as pointed out in this attached link ... helped having an extra set of hands when installing the belt. With the right tools pretty much a...
  17. M

    What lowering springs are you guys using on ur 99+ stangs?

    I'm running Steeda as well but with KYB struts from a 93 and back (1" shorter) stiff and some of the daily smooth is gone (watch the coffee). I don't have c/c plates but do have offset rack bushings. I am running 25 3/4 front , and 27 1/4 rear and yes you have to watch the speed bumps. I had...
  18. M

    special engine pic wanted

    Man you know what i did :bang: I attached it under a different thread. It is in the tech forum Under "numbers to Ponder..." its my thread and the attachment is on the first one. Sorry bout that
  19. M

    Fog Lights Electrical Q.

    I have the late model 01 that has the switch under the stereo. i used all the internal wiring to keep stock but spliced in a harness/ relay / fuse iand ran it in the engine bay. I had to steal the connectors for the lights themselves from my 96.
  20. M

    Numbers to ponder....laugh at ...etc

    Righhhhhtttt so now the root of my pondering ... Ours are very similar with the biggest difference being mines an Auto (158) vs your 5 spd (194) ... There would be almost 36 hp difference .... even if I put back on the stock throttle body there would be 30 HP difference....I think i have...
Top Bottom
Back
Forums
Menu