Search results

Hello all. I've got a CHP 347 stroker kit in a factory block. I have made 50 or 60 passes in the last 8 or 10 years with it. The engine is in a 91 LX and has gone 11.69@113. Current engine has a pair of fully ported GT-40 "y" heads, a port matched cobra intake, 38# injectors, 65mm TB, 90mm...

hello all. i have a 91 fox lx hatch that runs mid 11's. i've recently installed a completely new brake system. it consists of a strange (mopar) manual master cylinder and aerospace 4 piston brakes at all four corners. all the lines are new and there are no leaks. i moved the contact point for...

cork, moroso rubber over steel? just dropped the pan and straightened out the rails. (they were badly deflected due to over tightening) thinking of the rubber over steel. what do you guys use? thanks, rob

hello all. i have hot rod c-4 in my fox. it has all the stuff ati makes for a c-4. after i run the engine there is about a pint of tranny fluid on the ground and for the life of me i cannot determine where it is coming from. the bellhousing and torque converter are dry as is the...

dumb question here...... where do i pick up the emoticon avatars on this site from?

hello all. i'm building a high rpm (7000 or so) high compression (12:1) na engine for my 91 hatch. i'm using a pair of fully ported trick flow r heads that should flow 325 on the intake (they will be flow tested in a week or so as they are at the machine shop getting the guides sized and the...

anyone currently using these heads on a 347 stroker? i have a pair i'm going to use on my car. thinking of going with an edelbrock victor 5.0 manifold. looking to build a na high rpm strip engine. any thoughts?

hello all. wondering what a 1992 1/2 mustang vert special edition is worth now days. the car is the red with white interior, top and wheels version. 50,000 original miles. needs a cosmetic restoration (new top, carpet, seat covers etc...) what is the range in pricing guys? thanks, rob

recently started to complete my 91 lx hatch drag car. i bought the car new in spring of 92. has 55,000 original miles. 347 stroker na with a c-4 transbrake tranny. full cage and everything has been removed that does not make it go or stop.

hello all. i've got a 91 lx with a na 347 stroker in it. i bought the complete aeromotive fuel system a few years back and i never drove the car. i started it but never had it dyno tuned or drove it. i'm finally getting around to finishing my project this winter to be ready for spring. i'm...

hello. i have a 302 (now 306) engine for sale. it was rebuilt for a project back in 1988. the project never came together and i kept the engine all these years. i started it and broke it in back in 1988. (ran for 1/2 hour to 45 mins) filled it with 15 qts of oil and bagged it. it was bored...

hello. selling a set of four silver ford pony wheels that came off my 55,000 og miles lx. no center caps (some a-hole stole them) very clean shape. 200 firm. i'm located in northern ohio. phone number is: 440-204-9591 thanks.

here's a set of ssm upper control arms for a 79-93 5.0 mustang. i had these mounted but never drove the car. they have zerk fittings so you can grease the pivot points. they have very, very light surface rust in a couple spots that could be easily cleaned off and are still in perfect strctural...

hello all. i'm building a 91 drag car and i have moser c-clip eliminators on the rear. i want to use aerospace rear drag disc brakes but i don't know if the mounting bracket will clear the c-clip eliminators. also, my factory drum backing plates are sandwitched between the c-clip eliminators...

here's a little 306 we built up for my 1975 searay. it's a 1975 block that we decked and torque plate honed. it has a roller cam retrofit kit in it and ported gt-40p heads with roller rocker arms.... dual plane ported manifold and holley 600 with the choke horn milled off...canton seven qt...

hello. i put a c-4 tranny in my 91 lx and i need to know what to do about the speedometer cable. is there a conversion kit? i'm running a 4.10 gear so i also need to know what color gear to use. if anyone can lend some insight i'd appreciate it.

hello. my name is rob and i'm from north east ohio. i bought my 91 5.0 lx brand new in spring of 1992. it now has a 347 stroker and is basically a race car. i registered way back in 04 but i'm just starting to post now. life got in the way of my project but now i'm going to try to finish it...