Search results

  1. S

    How will this sound? Anyone have a clip or experience??

    Gears should be fun, midpipe....I like my Mac O/R H, but if I didn't have bad luck with my Dr. Gas X pipe, it would still be on my car. The Dr. Gas sounded way too good! (I got it used, that's why I had problems with it). Enjoy your mods. Might want to also consider a plenum/tb combo if your...
  2. S

    Official Tremec 3650 Issues Thread

    Thanks! :cheers:
  3. S

    Official Tremec 3650 Issues Thread

    pm me who you talked with also. I got the 2R tranny, and I know it isn't right. I would like to talk to the same person you did so I have some really good ammo when I go back to the dealer.
  4. S

    Official Tremec 3650 Issues Thread

    Should be near the rear of the tranny on the passenger side; a little metal tag.
  5. S

    mac catback, drone..cant take it! help!!!

    Dr. Gas!!! Had that with my flows, would have kept it if I didn't have a leak(not Dr. Gas' fault). No drone at all, just a wonderful exhaust tone.
  6. S

    Any tips on installing O/R x-pipe? Help.

    Great idea! :nice:
  7. S

    Official Tremec 3650 Issues Thread

    Should be on your invoice. It will start with a 2R3Z or 3R3Z. Hope you find it, I'd sure appreciate it! :nice:
  8. S

    Official Tremec 3650 Issues Thread

    Just curious, what was the part nubmer of the transmission they gave you? Still trying to find out if they gave me the wrong one...
  9. S

    Any tips on installing O/R x-pipe? Help.

    Napa Part # 600-1819 Get them for the driver's side == no leaks
  10. S

    K&N Typhoon CAI

    http://www.knfilterchargers.com/search/product.aspx?Prod=69-3521TP
  11. S

    what is a plenum

    See yellow circle in attached picture. (It's a C&L Plenum) It's an old pic too, it's polished now :nice:
  12. S

    Dr. Gas X Qs

    Yep, you're right on the parts. You could probably make everything you need on your own. o2 ext. are just longer wires, and MIL elims are just some parts from radio shack. Search on MIL elims, you'll find the diagram and parts list somewhere. I would go with a 6011 rod. 7018 is more of a...
  13. S

    Dr. Gas X Qs

    1. Yes, it will bolt up. But, you'll want to get Napa Part#600-1819 header stud kit and get rid of the crappy shouldered studs. You'll want 4 clamps to clamp the x together where it fits right. Then take it and get it welded together or weld it together yourself. (It comes in 5 pieces, unless...
  14. S

    Oil Catch Tank

    I sure hope that breather you have stuck onto your intake tube has a one-way check valve so it can't suck anything in!!!!! If not you're seriously leaning out your a/f and are bound to cook something sooner than later!!! Get that breather off there and plug that hole!!!!!!!!!!!!!!
  15. S

    timing adjuster tools needed??

    18mm socket (for original crank bolt) 19mm socket (new crank bolt) 10mm socket (ac compressor bolts) 10mm wrench (sensor bolt) 8mm wrench (sensor bolt) allen wrench for bolts to adjust timing(I think they are 5mm) utility knife for removing extra silicone under crank bolt 3/8" drive...
  16. S

    Flowmaster American Thunder's or Magnaflow Magnapacks?

    www.mustangexhaust.com -sound clips galore
  17. S

    Driver's side leak on header flange with new MAC H-pipe

    Get Napa header stud kit, part #600-1819. Replace the flanged studs that Ford uses, that's the reason it's leaking like it is.
  18. S

    Header To Mid Pipe Stud

    If you can get a nut on it the stud some, (even just slightly onto the end of the stud), you could weld the stud to the inside(threads) of the nut, then spin the stud out with a socket.
  19. S

    Nitroused 5.4 Is DONE! Many Pics Inside! Got 1 Question NEED answer Now!

    That's sweet!!! Can't wait to see some numbers on that beast!
  20. S

    FRPP shorty headers. How?

    If you're leaking, it's probably the bbk X leaking where it connects to the header. The flange on the X hits the shouldered studs on the header before the ball-and-socket connection is sealed. Go to Napa, get a header stud kit #600-1819 and replace the shouldered Ford OE studs, then put your X...
Top Bottom
Back
Forums
Menu