Search results

I removed my AC some years ago but the winters are cold where im at so just wondering why my heater does not work. If you remove the AC does it disable the heater? The fan does not come on or anything. Is there a way to enable the heater even tho the AC is removed? Thank you

My valve cover bolts keep backing out. Which ones you fellas using that stay in them heads? Thanks

OK here is my situation. I have AFR 185/61cc/stud. I have a Performer RPM 1 with a 3/8 spacer I also have this camshaft from Probe: Part # Int Exh Int Exh Int Exh Center 11503 .509 .532 300 309 222 232 112 And I have these rockers from Probe: RATIO STUD SIZE OFFSET...

Anybody know where there may be a list of trouble code definitions for our rides on the net? Thanks :flag:

I did my routein code check and I got a 311= thermactor air system/fault during engine run self test. 314= thermactor air system fault during engine run self test left side. What the heck is a thermactor and how much and how easy is it to replace? Thanks fellas

How difficult is it to remove and install a torque converter?

Hey the two torx bolts that are on the Lightning MAF, are they to remove the maf wires? Cause on every other maf I have had they were to remove the wire element for cleaning but on my LMAF they just turned and they did not unscrew or let me pull the wire out from the top. Did I just majorly...

Does anyone know if there is a step by step on this process anywhere on the web? Or can someone kindly post a step by step and help me out. I got new black carpet from 50resto and Im ready to slap that stuff in! Thanks :)

What do you guys think of the price of this Edelbrock Performer Upper Intake? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330076499683&ssPageName=ADME:L:LCA:MT:31

Here is the latest pics of the ride. The rpm was freshly installed. My Combo: CHP street fighter pro street 347, .509/.532 222/232 (112), AFR 185cc x 61cc, all forged internals, 10:1, main girdle, windage tray, MSD ignition/dizzy/coil/ timing advance control, fluidyne rad, canton...

Can anyone explain how to install rack limitors. I put in an aftermarket power steering rack and now my tire/rim will grind on my A-arm if if turn the steering wheel too much. This is what I ordered. Now how do I use them :shrug...

I am switching from a Edelbrock Performer to a Performer RPM 1. Do you think Ill see any gains with my current combo if I switch to a RPM 1? and if so how much? My Combo: CHP street fighter pro street 347, .509/.532 222/232 (112), AFR 185cc x 61cc, all forged internals, 10:1, main girdle...

I just finished removing my A/C and the only thing I was not able to get to was the condenser. Is there a benifit to removing the condenser? Will removing the condenser make that much defference in cooling the radiator? How much does the condensor weigh? If anyone removed their A/C and opted to...

I have searched and have not been able to find a concise step by step on how to remove this thing. One question though. Is it possible to remove the condenser without removing the radiator, and if so...........how? Pictures would be fantabulous. Would love to see any engine bays without the A/C...

These things are scarce. Anybody know where I can get just the upper without sacrificing my firstborn? Thats the RPM (old style), NOT RPM II.

well my latest project is finished. a snow performance boost cooler NA and a MSD 6860 timing advance box. Let me tell you the boost cooler is awesome. I was on the freeway and dialed the timing up by 10 and floored it. of course it started pinging so i hit the meth injection switch and the...

The bottom specifically talks about the dangers of the SN95 models. http://www.safetyforum.com/fordmustang/

after hearing all the hoopla about cars burring down i figure ill do some preventative mantainance and replace the fuel lines. anybody know where I can get some new fuel lines? I would like to replace them from the fuel tank to the fuel rails. anybody got any links to some budget one as well as...

Will a Performer 5.0 RPM II fit under the stock hood with a 3/8 spacer?

the kit Kit installed, carpet cut looks bad in the pic but it came out pretty good in reality. Empty spot, I wonder what should go there....... maybe this.... :nice: