Search results

  1. Deadlysniper

    Doing a little cleaning! Pics

    Hey Smokedya, are those American racing wheels 4 lug? And what is the size? 17x ?
  2. Deadlysniper

    how to hide wires in engine bay?

    All you have to do to hide the wires on the side is disconnect the harnesses and lengthen the wires. Just keep track of all the wires and solder them. I did this on my passenger side. I ran the mass air wires through the fender and out a little hole to the sensor. As for that nasty starter...
  3. Deadlysniper

    how to hide wires in engine bay?

    All you have to do to hide the wires on the side is disconnect the harnesses and lengthen the wires. Just keep track of all the wires and solder them. I did this on my passenger side. I ran the mass air wires through the fender and out a little hole to the sensor. As for that nasty starter...
  4. Deadlysniper

    best paint designs/jobs

    sorry this reply took so long. My server went down. Anyway, the blue on my car was supposed to be a cobalt blue but it turned out to be a blue/purple pearl. That's the best description I can give you. If you want something like it, just ask for a blue base with a purple pearl and it'll be...
  5. Deadlysniper

    best paint designs/jobs

    Mine! LMAO! :banana: :spot:
  6. Deadlysniper

    How loud is your PS pump?

    my Pepboys have always been really cool about replacing stuff. I've wasted so many alternators that I can't even count anymore. Pepboys has replaced it each time!
  7. Deadlysniper

    How loud is your PS pump?

    Our beloved fox cars are notorious for this problem. Mine is loud also and I plan to get one from Pep Boys, so I have a lifetime warranty! LOL
  8. Deadlysniper

    Vacuum Question

    nice... lol. I have my vacuum running to a "T" fitting on the vac line that runs from the back of the intake over behind the passenger strut tower. It reads all the time, drops to zero when I hit it, since there is no vacuum. By the way, a vac gauge is more useful than you realize. When your car...
  9. Deadlysniper

    Mesh Grill on a foxbody?

    you can use a little fiberglass rsin here and there to hold them in place.
  10. Deadlysniper

    gauges

    I drilled a hole in the firewall to run my copper oil press line, and the nylon vacuum line. I then used a big grommet and black silicone to seal it. The hole is at about the heigth level of the drivers valve cover, more or less.
  11. Deadlysniper

    post pics of your fox body.....

    another, this is one before the 2" drop stanget doesn't let me post pics right
  12. Deadlysniper

    post pics of your fox body.....

    Hey, why did my image come out as a link when the pic showed up in my preview post?
  13. Deadlysniper

    post pics of your fox body.....

    My 93- 17x9's, 255/40 17's all around, MAXSPEED springs, 2" drop, no quad shocks
  14. Deadlysniper

    Will 302 based mods work on a 351W or larger?

    one other thing I forgot, you have to do some minor mods to your coolant lines that run from the lower manifold to the heater core if you plan to keep your heater. I think it just entails cutting a small piece off and using a rubber hose or something. All the 351's we've done don't have heaters.
  15. Deadlysniper

    Where to buy a KIRBAN adj. fuel reg.!!!

    or call www.bieberfever.com in Phoenix AZ. Great guys, I think they have it for $69.
  16. Deadlysniper

    Will 302 based mods work on a 351W or larger?

    True! a 393 or a 408 stroked 351 will get you 11's with good heads, naturally aspirated!!! :banana: :nice: :hail2:
  17. Deadlysniper

    Will 302 based mods work on a 351W or larger?

    Oh and you'll need a rased hood. When I do my 351 swap, I'll stay with my cervinis stormin norman and a cobra upper. it'll clear fine. Also, you use stock motor mounts
  18. Deadlysniper

    Will 302 based mods work on a 351W or larger?

    I've done 351 swaps at a shop I work at. Here's what you'll need: A Trickflow 351 lower intake manifold. the 351 has a 9.5 deck and the 302 an 8.5 i think. The lower intake is much wider than the 302. Second, you need a new distributor, a stock 351w dist with the TFI module on it. Third, a...
  19. Deadlysniper

    Which Model Gauges?

    That finger throwing kid was too funny so I had to use it. I got the LED's from Circuit City, in their new "Import Section". Thing is, I noticed they're not carrying them anymore, at least not in El paso. They're by a company called Eurolite. They had them in various colors, including a...
  20. Deadlysniper

    Which Model Gauges?

    Check out my site here Snipers Mustang to see my 4 phantoms and single cobalt af gauge. I'd use led bulbs in place of the Phantoms standard bulbs. They look much nicer. You'll see in the picstures section of my site. They're a bit blurry though sorry :shrug:
Top Bottom
Back
Forums
Menu