Search results

  1. M

    Could I use a B cam with my combo?

    Hey all, I was speaking with the guys from Dallas Mustang and they said I could not use a B cam with my current setup due to having 1.72 rr's. I am pretty new to cam specs and such and just want to make sure I would not be getting myself into trouble if I upgraded my cam. I currently have...
  2. M

    What do u think of the F cam or B cam?

    Yeah definately look at doing the heads first otherwise you will not notice much of a difference even with another cam. If I were you I would do them both at the same time.
  3. M

    Lowering springs

    I have the Ford Racing C springs and they are pretty good. I had Eibach prior and there is a night and day difference between the two of them. The Ford springs ride much better as far as comfort goes but are not as stiff and don't lower the car as much. All in all I like them better personally...
  4. M

    2 inch drop too much?

    I had mine dropped 2" and it looked straight up awesome. I did have CC plates though which makes a huge difference and have since swapped my springs out for FMS C rate springs. These are only about a 1" drop but hella better for daily driving. With the 2" drop my car would hold the road like a...
  5. M

    Cruise control sensor above the gas pedal?

    Hey all, Is there a place besides a bone yard where I can get another cruise sensor that attaches above my gas pedal? I have a manual trans if that makes a difference in the way cruise is setup. I am finally getting around to getting the cruise back up and working again after it met it's...
  6. M

    Best clutch for daily driving?

    Heh then again maybe I have just got used to the King Cobra. I will say one thing though it definately requires alot more effort then my hydrolic clutch in my Bronco but that's to be expected since the Mustang is cable driven.
  7. M

    Best clutch for daily driving?

    I have the king cobra currently and the pedal effort is not bad at all. It seems to grip ok for normal driving but in extreme driving it is not as good as I would like. I also have a leaking rear main and will be swapping it and the clutch out soon. I will be putting a Centerforce dual friction...
  8. M

    Please help me! clutch quadrent install.. About to go crazy!!!

    I feel your pain man. I had a heck of a time getting that POS off. I ended up using my Dremel tool with a small cutting wheel and just cut the POS plastic piece off. Before doing this I had an hour or so into trying to pry it off and finally gave up. If it wont pry off then cut it off but be...
  9. M

    anyone ever seen a balancer crack???pics

    I have seen it on a 79 Mustang due to over reving the motor. (Not implying that you did this). I was like 19 years old and very inexperienced and learned that stock motors will not do 7k plus rpm for long. Note to self never floor a Mustang on a gravel road without a rev limiter. :bang: lol Good...
  10. M

    What intake to use with my setup?

    intake My car is running really rich right now and I am attributing it to having a stock intake while running 24lb injectors. Do you think a new trick flow intake will help to lean it out some with the extra air flow? I have played around with my fuel pressure and the car only seems to like it...
  11. M

    What intake to use with my setup?

    I guess at this point with your feedback I am leaning toward the Trick Flow Track Heat intake. It looks pretty good and has descent flow numbers to boot. This way I should not lose too much low end torque either and still see some descent HP and Tourqe gains in the upper RPM range. Thanks all...
  12. M

    What intake to use with my setup?

    No boost as of yet but eventually I would like to add around 6-9lb. I dont mind buying another intake when I add the supercharger to gain additional power but for now I want to keep the stang drivable on the freeways and get the crappy stocker off there to let the gt40's breath a little bit...
  13. M

    What intake to use with my setup?

    Intake Yeah I checked out the Trick Flow and the numbers look pretty good. I would have to agree it is pretty ugly compared to the gt40 but it's not always looks that count. I guess one thing I should have mentioned is I don't want to lose too much of my low end torque with this swap and my...
  14. M

    What intake to use with my setup?

    Hey all, I am finally getting to the point of replacing my stock intake and was wondering what everyone here thought as to which one to get with my combo. I really like the looks of theGT40 intake but it is pretty spendy and I know for the money there are better out there. I am planning on...
  15. M

    Which T5 shifter to buy?

    I have the Tri-ax myself and like it; allthough I have never used the Pro5.0. I have heard good things about both.
  16. M

    what autolite plugs for gt40 aluminum heads?

    Thanks for the info I got some 3924's and it runs like a champ. :-)
  17. M

    what autolite plugs for gt40 aluminum heads?

    Hey all, What Autolite plugs should I be using with my GT40 y303 heads? I had some Bosch platinums in there before but they are crap and I am looking to swap them out. Any advice would be appreciated. :-)
  18. M

    Mid West If You are in AR KS IA MO MN NE ND SD Register here

    Hey all i'm checking in from sioux city, IA. I have had my 91 GT for a few years now and would not trade it for the world.
Top Bottom
Back
Forums
Menu