Search results

  1. J

    Need Pics of 05 V-6!!!!

    Hey guys, I know that there are alot of pics circulating out there of the 05's, but does anybody have any real good pics of the V-6 model? This is the one that my wife and I can afford and will more than likely wind up with, especially since she just wants it for the looks anyway. Plus the...
  2. J

    2005 Automatic GT Suppose It's Possible????

    well, i have read about stock 2004 gt's going into the high 12's with no more than a k&n filter and 4.30 gears, now granted those were 5 speed cars with slicks, but now the automatic 05 has about the same first gear ratio as a 5 speed, and with 4.56 gears and some slicks and some teaks to the...
  3. J

    2005 Automatic GT Suppose It's Possible????

    Anybody else????
  4. J

    2005 Automatic GT Suppose It's Possible????

    Ok, I was thinking about this, being a drag racer at heart. Does anybody think it would be possible to take a brand new 2005 GT with an automatic, because autos can be faster than a straight drive in a drag car, if everything else is right, at least they are more consistent anyway, but enough...
  5. J

    Performance Shops In NC????

    Can anyone tell me if there are any good reliable Mustang performance shops in the Winston Salem, NC area?
  6. J

    Mustang Performance Shops In NC

    Does anybody on here know of any good reliable Mustang performance shops in the Winston Salem, North Carolina area? Maybe even Raleigh, Charlotte, Concord?
  7. J

    Fuel Injection to Carb Conversion!

    I have been doing some research since last night, and have come up with using an Edelbrock Performer RPM Air Gap intake with a 650 carb. Is this a good combo? dastang, can you hook me up with the info for the HEI conversion? I would greatly appreciate it. I am not going to be doing this...
  8. J

    Will 15X10 Draglites fit a stock fox??

    89Mustang is right, you will have to remove the quad shocks with any backspacing 10" wide wheel. I tried a set of them on my 92 with a 6 and 1/2" BS and the tire that was mounted on the rim (275/50/15) hit right on the frame rail, I had the car on a floor jack and could not even turn the tire it...
  9. J

    Will 15X10 Draglites fit a stock fox??

    it really all depends on the backspacing of the wheel, a 5 and 1/2" backspaced will fit, but a 6 and 1/2" backspaced will hit the frame rails. I run 8" wide with 4 and 1/2" backspacing and 275/60/15 BFGoodrich Drag Radials with no rubbing, but my fenders have been rolled too. So that helps...
  10. J

    Fuel Injection to Carb Conversion!

    dastang- can you hook me up with the info for the HEI conversion, what is HEI?
  11. J

    Fuel Injection to Carb Conversion!

    I already have the GT-40 Aluminum Heads, the ones that are not street emissions legal, so I was thinking about a Victor Jr. intake and a Holley 750 Carb. Would that be a good combination with those heads and cam?
  12. J

    Fuel Injection to Carb Conversion!

    I know some of you die hard 5.0 fans out there have made this conversion. I need some help, I am wanting to do this, but I want to know all the parts needed first. I know I will need an intake and carb, distributer, different fuel lines and fuel pump. Can I still run the E-303 camshaft or will I...
  13. J

    anyone heard dynomax race bullets?????

    I had 3" race bullets bolted directly to my longtubes and it sounded awesome, I also have the E-303 cam, and you can definitely tell the cam lopes with these mufflers. Now I have a 2 and 1/2 off road h-pipe with Dynomax super turbos dumped under the car and it don't sound so good, too quiet, but...
  14. J

    Converting 92 LX front to 86 LX front????

    Can anybody tell me what all is involved with this change? Parts list, that sort of thing? I would think all I need is the bumper cover, headlight panels, headlights, side marker lights and parking lights, and maybe a new front bumper support? Is this all, will the 86 front end just change out...
  15. J

    Clunk!! Is my rear going out?

    I have this exact same problem, and mine will be going into the shop soon. Mine is definitely the rear end though, I just put brand new aluminum driveshaft and u-joints in it, also just has the rear end rebuilt with my old 3.55 gear. My mechanic seems to think it is the axles loose inside the...
Top Bottom
Back
Forums
Menu