Search results

  1. mustangramair

    New gas tank

    It's been a very long time since I have posted. My fox, that I have had since 2000 had some rott on the passenger side shock tower. The old 302 was also leaking from the rear main. I pulled the motor and had the shock tower fixed. Since the motor was out, I decided to put in a 331 stroker...
  2. mustangramair

    SOLD Tfs Stage 1 Cam, Tfs Valve Springs, Hydraulic Roller Lifters

    These three items were installed new and used for 7K miles. Trick Flow Stage 1 cam $170 + shipping Trick Flow Valve Springs $60+ shipping These springs are off my Twisted Wedge Heads. Not the upgraded Springs. I believe they are the .540 lift Springs. FMS Hydraulic Roller Lifters (OEM...
  3. mustangramair

    SOLD Explorer Lower Intake

    I used this intake until I put a ported lower on. Price is negotiable. $50 plus shipping Location Ankeny, IA 50023
  4. mustangramair

    Lower Intake To Head Gasket

    Hey guys, It's been a long time since I posted. I was taking my lower intake off to put a ported lower on. Once I got the intake off, I think it's the number 1 and 5 cylinders (the two front) the runners on the heads were half covered with the lower intake gasket. It looked melted. What...
  5. mustangramair

    Aluminum Driveshaft question

    Hey guys, I just put in a Tremec TKO 500, I think it's time for a new drive shaft. I see that the FMS comes with a 28 spline yoke, can I just swap my 31 spile yoke with that driveshaft? Is there a drive shaft I can order that comes with a new 31 spline yoke? Excuse my ignorance if this is a...
  6. mustangramair

    Update With Fuel Issue

    I finally figured out what my problem was last week. As some of you may remember, my car was flooding out and the gauge was pegged at 80 PSI. Well, my fuel pump broke and was pumping at max capacity which blew my regulator out, which saturated my charcoal (sp) canister, and all the excess...
  7. mustangramair

    Fuel Pressure Problem

    Hey guys, last fall my car began to run like trash instantly while I was driving it. I was going to scan the computer when I noticed my fuel pressure gauge was reading 80 PSI. Long story short, I just put my new regulator on and hooked my gauge to the schrader valve instead of directly to the...
  8. mustangramair

    Fuel Pressure Gauge Help

    Hey guys, my BBK (junk) fuel pressure regulator broke after 2500 miles! I bought a Kirban fuel pressure regulator and it does not have a gauge port. I was running an Auto Meter mechanical FPR, but now I can not hook it back up. I was wondering if there is a fitting I can use so I can hook...
  9. mustangramair

    Problems with BBK Fuel Pressure Regulator

    A couple months back i posted that all of the sudden my car was stalling out and running very rich. I bought a code scanner, as was suggessted from this site, i started the car up because the scanner said the car needs to be warm for the first scan. So i looked under the hood trying to find...
  10. mustangramair

    Bad 02 sensor?

    I was driving the car last night and everything was fine until i stopped at a stop sign. The car started to have very bad idle surge, 500 rpm to about 2500 rpm. The car was hard to start back up after it stalled out. It drove badly and died out at idle when i was pulling into the garage, i...
  11. mustangramair

    Intake help

    Hey guys, my buddy has a 99 GT. First off excuse my lack of knowledge on the 4.6, i have only worked on my 5.0 Little did either of us know the intake had a recall, his cracked lastnight. Long story short, his recall time was up April 16th:nonono: Ford will not do anything, which i have to...
  12. mustangramair

    Rust on chrome?

    Hey guys, my friend just called and asked me if i had a good solution getting some rust or corosion off his chrome cobra R's. I haven't seen the rims lately so i don't know what he is talking about, i didn't have a solution. You guys have any tricks to take care of this? Thanks nick:)...
  13. mustangramair

    SN95 radiator for a Fox

    Hey guys, my radiator is starting to leak a bit. I was going to upgrade but i don't have the money right now. I have a chance to get a radiator out of a 95 cobra, will it fit? Thanks, Nick
  14. mustangramair

    Alternator in 94

    I did a little searching but i didn't really see an answer. Are the alternators in the SN95's a 3g alternator? My friend is getting a chrome alternator so he is going to sell me his stock one out of his 94 cobra for $40. I have an electric fan and my G/F just bought me U/D's for my birthday...
  15. mustangramair

    Hit battery with wrench while connected

    Hey guys, i was working on my 89 GT today and i forgot to disconnect the battery. Well a wrench hit the postive battery terminal and something else because it sparked and smoked. Now my car doesn't have any power going to the anything. The fuel pump doesn't turn on, no dome lights, no...
  16. mustangramair

    Question about wrongly adjusted rockers

    Well i did the H/C/I swap and it runs great but i hear a very loud ticking noise. Because of this i have not driven the car very much. I am trying to decided if this is a leak at the headers or wrongly adjusted pedestal mount rockers. The car runs GREAT. I think i might smell some exhuast in...
  17. mustangramair

    Break in period for almuninum heads

    I just put Trick Flow heads and cam in. I know they say to drive 2-4 hours before getting on the car hard. I have put 2 hours on the heads and have not gotten on the car. I was wondering how long you guys with alum heads waited before pushing your car. What is the reason behind this, is it...
  18. mustangramair

    Question about EGR spacer

    Hey guys, i just put on an explorer intake and took off my stock one. Now that i have done that the coolant line that hook up to the egr spacer has no place to go. The one that goes to the front of the egr will still run coolant through, but where it is suppossed to exit out the back there is...
  19. mustangramair

    Finally got H/C/I running

    Some of you helped me out alot a couple of weeks ago after my car wasn't running. Thanks to everyone who gave me advice :nice: One of my problems was that Trick Flow said i couldn't run Proform roller rockers, they didn't promote proper valvetrain geometry. The last thing that was wrong was...
  20. mustangramair

    Installed H/C/I and now not running

    Hey guys, i installed TFS TW heads with TFS stage 1 cam and explorer intake. One of the guys with us didn't mark the distributor when he pulled it. We got the car all back together and it didn't run well, i thought it was because the timing was so far off. WEll i had it towed to a ford...