Search results

bump. Please help if ya can.

yep, be sure you are on the compression stroke. Also put the cap on the distrib and mark on the distrib body where #1 post is. Usually when dropping the distrib the gears move the rotor at least 1 tooth as it meshes with the cam gear. I usually back the rotor at least a tooth before the #1 mark...

Help! 95' Cobra R 351w Question... How much lift can the factory dish pistons clear? There are no reliefs in them, but they have huge dish's. I cannot seem to get a straight answer from anyone as to the size of the dish's or how much lift I can run. Even SVT told me they do not have the specs...

You may want to drop another degree cooler plugs as well. 2 degrees cooler that stock are recommended for 150 shot and what I used for my 175 shot. 200 might put you over the edge. Just a thought.....

My 3550 was around $1500 for tranny and bellhousing.

Yea, something like 2.5 degrees of timing per 50 shot. Anyone know for sure?

I use a 3550 v2 in my coupe, but I don't make the numbers you all are. I will say this though. I have seen 3550's crack the case around the bolt holes on very hard launches (1.30's 60').

Guess I was lucky then... I ran 175 shot Top Gun system on my stock 103k mi 88gt with a 155pump. It never poped a gasket or blew smoke even after I was using a bottle a day through it for almost 3 months. Yes, I was soo a junkie. Then I was broke and only burned a bottle on weekends at the...

I have no cats, adj FPR (set at 42psi otherwise the motor falls off at 4500), and I do have O2's....

Anyone have any ideas on what to check for my coupe running way rich? It will burn your eyes from exhaust just after a few seconds behind the car. Here is a link to my stuff. Pls don't laugh. I made this site in 1 hour so I could get credit for my final exam in my web class. My 89 Coupe...

My old stang 88' Gt stock motor on 175hp Top Gun system with 3000stall , 3.73's and a set of MT sportsman pros on some ten-hole rims. I went 13.0's and a occasional 12.9 on a stock suspension and the front sway-bar removed. I would normally get 1.8 to 1.7 short-times. I used a full-throtle...