Search results

  1. 1

    Randy help me out on plugs??

    Plugs Randy, Thanks for your assistance. The MRT mid pipe shoud be in next week. Once I get the midpipe installed I will be having a tune done, in about a month. So I want to get new plugs, but don't need them yet. I have your phone number and will definitely give you a call when I need...
  2. 1

    Randy help me out on plugs??

    Plugs Randy, Thanks for the feedback on the plugs. I certainly appreciate it. I will probably go with the coppers and the AGSF22C plugs. I currently have the following mods: Accufab 75 mm TB and Plenum assembly, an older Densecharge CAI, in the engine compartment with shield, FRPP Alum...
  3. 1

    Randy help me out on plugs??

    PLUGS Randy thanks for the feedback. Now if I wanted the Platinums in the AGSF32/22C-P do they make those also? I guess the AGSF22C is just a copper plug??? If they make a AGSF32/22C-P platinum, how much do they run per plug?? I do like to run it hard and I also do a lot of highway driving...
  4. 1

    Randy help me out on plugs??

    Randy, I have an 02 Mustang GT. I am interested in replacing the plugs. I know that the plugs that come standard are AWSF32C, correct?? I heard for a replacement standard plug to use the AGSF32C. Other then the lengths of the threads for the AGSF32C, are there any differences in these...
  5. 1

    Fuel system questions?

    Stock GT PUmp Randy, do you know what the stock Mustang GT pump flows at?? I have a 2002 Mustang GT. Thanks Paul
  6. 1

    New Jersey Emissions

    I want to thank everyone for their assistance and writing in. The Stang went right through the inspection and passed with flying colors. They plugged into the computer port for emissions check and of course no codes. They popped the hood and looked around, but everything was stock. As far as...
  7. 1

    New Jersey Emissions

    Wish I knew some one I could slip a 20 to and pass. Have to go to the inspection station unfortunately. Hey AMBO, that is an interesting question. I would imagine they could reject you for a visual inspection, since it isn't stock looking. I know some of the blower manufacturers are CARB...
  8. 1

    New Jersey Emissions

    Thanks everyone for your responses. Sounds like I shouldn't have a problem. I an going this morning, right after work. I did remove the Densecharger CAI and put the whole stock pieces on. Can't wait to get them off, car is sluggish. Didn't think I would feel a difference but there is. I will...
  9. 1

    New Jersey Emissions

    Have anyone in Jersey taken their car thru the Inspection Station with say a cold air kit in place?? How about having a MRT Catted H pipe or equivalent catted x-pipe and failed the visual inspection?? I know they can either put you on the rollers or just hook up to your computer and look for...
  10. 1

    Intake to plenum gasket.

    gasket and plenum. DTNODYA. Thanks for the PM. Excellent pictures and thanks for the part number of the gasket. I sent you a PM in response. Later. Paul
  11. 1

    Intake to plenum gasket.

    gasket and plenum. DTNODYA, Thanks for the manifold pictures, they really helped. What it looks like, he sold me just the o-ring that fits into that intake opening gasket, not that whole gasket assembly. I wish I had a part number for that whole gasket so I can bring it to him. Well, I...
  12. 1

    Intake to plenum gasket.

    gasket and plenum. DTNODYA. Thanks for the picture of the gasket. The part I got from Ford last night doesn't look like that at all. The part he sold me looks like just the that blue/green colored o-ring in the inner part of the gasket. I guess he sold me the wrong part or just the...
  13. 1

    Intake to plenum gasket.

    gasket and plenum. Thanks again. The parts guy at Ford wasn't sure and I really didn't know. He thought it was one of those flat material type gaskets. Good to know that I am getting the right gasket/o-ring. If I get the old one off without any damage I will save the new one for any future...
  14. 1

    Intake to plenum gasket.

    gasket and plenum. Thanks streethorse. I will definitely be careful. But if I need one I will have it. Does the gasket that is on there, does it look like some type of o-ring???
  15. 1

    Intake to plenum gasket.

    O-ring. BDcardinal. Thanks. I appreciate it. I am stopping down at the local Ford dealer and take a look at it. Good to hear you haven't destroyed any of the gaskets. But you never know. It is only a 7.50 piece so I will get it. Thanks again. Paul
  16. 1

    Intake to plenum gasket.

    I have a 2002 GT. I recently purchased a TB and Plenum Assembly from Accufab. I am going to install them this coming weekend. Of course they don't come with a new gasket for the intake to plenum assembly. So anticipating destroying the existing gasket when removing the old TB and plenum I...
  17. 1

    roush or frpp

    FRPP mufflers. I think the company that makes the mufflers for FRPP is Arven. Which is the same company that makes the stock GT mufflers.
  18. 1

    Someone reputable to install gears in NJ

    Gear installers NJ. I had Laroccas in Englishtown, NJ, near the drag strip install my gears 1.5 years ago. They did a good job, no gear noise at all. I would recommend them. They do a lot of work on Mustangs, have a dyno there also. I don't remember the price, but I had a lot of other work...
  19. 1

    Whats wrong with 3.90's?

    4:10's rule. There is probably nothing wrong with 3:90's, but 4:10's are better. The 3:90's are so close to the 4:10's in RPM on the street, so you mine as well go with the 4:10's I have 4:10's in my 02 GT for a year and half and love them. I wish I had gone with the 4:30's. My RPM in Fifth...
  20. 1

    3.73's Installed Finally

    4:10's all the way. Don't fear the gear. 4:10's as a minimum. I have a 2002 Mustang GT with 4:10's and aluminum drive shaft, great combo. I drag race a little but this car is my daily driver. At 70 MPH in 5th gear I pull 2300 RPM's. Also, it is a myth that 1st gear is not usable, it is...
Top Bottom
Back
Forums
Menu