Search results

This is the exhaust from my 67 Mustang with a 351W conversion. The headers are JBA Chrome Mid Length (pt # JBA-1653- $499.00 New). The entire exhaust is still currently welded with the only exception over the back of the wheel wells where I cut the straight portion to pull out from under the...

I am getting a set of welds for my 67. was wondering what anyone has run with welds. Looking at 15X8 with 4.5 backspacing and 15x4 with 2.5 back spacing for the fronts. Also whats the biggest rear wheel, was hoping for 275/60-15 with any luck. Running 17" bullets now with 275/40-17 and it...

I have a fresh 351w I just dropped in my 67 mustang project. Can't find any headers for the 351W. The 289/302 headers bolt up to my heads, but their to short with the taller deck. I have AFR aluminum heads if that matters. Will post pics as soon as I can get them to upload:( Thanks for any...

Looking at a pair of 302 heads with E6AE casting numbers. I think they are the 64cc chambers, not sure on the valve size. Any info would be appreciated. Rumple 69

I took the roller motor from my 89 5.0 (EFI) for my 67 coupe and did a rebuild on the short block. Standard 306 set up. Want to keep the roller motor with the edelbrock intake and 600CFM carb. Heads are ported stock but flow above GT-40's. Question is what cam have any of you used with a...

What type of fuel pump I have an 89 roller 302 block. Can I use the different cam cover from an older 289/302 that has a place for the fuel pump to mount. Or...do I have to run an electric fuel pump from the tank in my 67 coupe. Didn't know if you could even run a manual fuel pump on a roller...

I just picked up a 289 and c4 for my 67 coupe. Motor is a 2 brl. ID tag on intake manifold is 289 65 5 and at the bottom right it has A561. Any idea what it came out of or anyone know the specs on this motor. Thanks for any help or a link I find out the information. Rumple69, you...

Help, just screwed up one of my TRW forged pistons (stock). Anyone in the Phoenix area have one laying around from a rebuild? Thanks for your help. Rumple :(

GONE!

WTB and Parts for sale 1. I have stock valve covers, oil pan, heads (E7) and upper/lower intake with throttle body and mass air. Also have stock headers, all from my 89 5.0 Let me know what you need best offer on all parts. 2. Bassanni X Pipe w/Cats for 99 and up 4.6 GT/5 Spd $499 new...