Search results

  1. 4

    Test

    [img=http://img141.exs.cx/img141/9166/picture3615nv.th.jpg]
  2. 4

    302 Sportsman Block

    Same as others told you don't waste your money on a sportsman block, they are only marginally stronger than stock. The only people i know of that run them are circletrack guys, thats only because thats what the rules allow and they only make about 380 HP in LMSC trim. Get a Dart or R block or...
  3. 4

    Anyone with 90/10 Struts?

    I just put lakewood 90/10's on my car and they feel fine on the street, i couldn't see anyone complaining about them that cares about their 60' times, it actually rides a lot smoother now than it did before with my old worn out monroes. You'll love 'em, my car is a turd but the weight transfer...
  4. 4

    Could you please list your aftermarket control arms and if you are satisfied

    I have Ground Pounder weight jacker lowers and boxed stock uppers, i picked the lowers up for $30 and boxed the uppers myself, i like what i've got, definitely feels better than stock. A friend of mine has southside lift bars and boxed stock uppers, they have awesome traction even on street...
  5. 4

    You can't have nothing in this world because of f&%^in criminals

    I agree on not putting the tach on the dash, i have had friends get their tachs stolen. This is why i don't have one, i just got an auto meter pro shift lite and i keep everything hidden. But i know how you feel GATOR98GT some @$$bag stole the cd player out of my truck a while back, and kind...
  6. 4

    Upper rear Control arm bushing removal (the ones on the rear itself).

    Mine were Energy Suspension bushings and they came w/o the shell. I removed them like axeman did, by drilling holes in the rubber, it wasn't nearly as bad as i thought it was gonna be.
  7. 4

    what do do about fuel line

    Check this pump out on ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33555&item=2472937561&rd=1 It's as cheap as they get
  8. 4

    1/4 et's and hp for a blown 4 eye

    Check here: http://www.corral.net/tech/
  9. 4

    What is this?....

    http://www.corral.net/tech/
  10. 4

    What is this?....

    It's a fuel pump relay signal wire to the ecu, it would of been added during the mass air conversion you mentioned in another post.
  11. 4

    Ft Coilover on stock strut mounts?

    The instructions that came with my D&D kit says "If you are running a stock plate, you will need to modify your stock onion bushing in order to mate the coil over to the bottom of the plate." It doesn't give any details past that. I bought QA1 steel C/C plates from Summit, I think they were...
  12. 4

    Does your TKO make a lot of noise?

    About 5k miles on it now (although it's about 2 1/2 years old), and it's got synchromesh in it.
  13. 4

    Does your TKO make a lot of noise?

    Everything from the tranny back in my car is fairly new, but the tranny is loud as he!! sometimes. If i have the car up on stands idling in 5th gear it sounds like the trans is full of rocks, kind of sounds like the u-joints are gone but they are new. Also while coming home from the track...
  14. 4

    What will this do?

    Yeah, i'd like to run the "scorchin 'scort" at the track, but i'm not sure if their timers would go high enough!! lol
  15. 4

    What will this do?

    Good guess, it went 9.02 @74.38, 1.88 60'. Had some wheel hop and a tire rub, ran at 10* timing, 12psi in tires. The other stangs at the track (all 87 and up, 3 had et streets) that were around 9.0 with me were running 4-8 mph faster, i was quicker in first 330.
  16. 4

    Powershifting... Goods and Bads

    I've known people who were replacing gears and synchros every several months, but they raced every weekend. When i tore mine out i got a TKO, it seems that most switch to TKO, but a lot go to a C4 auto. Powershifting is great but it WILL take its toll, only doing it every now and then like...
  17. 4

    Powershifting... Goods and Bads

    Definitely get the Pro-50 shifter, but you will still tear the trans up. You'll lose 2nd or 3rd gear, usually 3rd. It does feel really good powershifting a sloppy old t-5 don't it?
  18. 4

    what size injectors to get??

    I'll second the 42's and 80mm pro-m, seen that combo on a few cars. I'm building a 306 for a friend now (TFS TW, P1-SC), and it'll have the 42's. We would be ok using 36's but they are more expensive than 42's. Try to buy for a combo you might have later instead of having to get larger...
  19. 4

    tubular k-member

    Stock K-member, A-arms, springs and camber plates weigh 122 lbs. D&D K-member, A-arms, coil-over spring kit and steel cc plates weigh 44 lbs. I weighed them on bathroom scales, not totaly accurate but close. MM is better in quality, but i got the D&D really cheap from a friend who ditched his...
  20. 4

    Question about rims

    The tires being wider won't affect your speedo accuracy, if they are shorter or taller that will affect it. I had pony's with 255/50/16's and they rubbed the plastic inner fenders and the frame, any rub is bad. You can look inside the wheelwell and see where the tires are rubbing pretty...
Top Bottom
Back
Forums
Menu