Search results

  1. 01MachGT

    I got bit today

    You would have to get a tune regardless. Upgrading your fuel system would be wise. 6-8 psi and you should be fine on stock internals. I'm running 11 psi aftercooled on my stock rotating assembly
  2. 01MachGT

    Ordered Pi Headswap kit

    I'd still see about getting it tuned to maximize what you get out of it.
  3. 01MachGT

    best clutch to get???

    my spec is working fine with around 460 fwhp
  4. 01MachGT

    $1400$

    I'd say give it to me and I'll put it to good use ;)
  5. 01MachGT

    New girl :)

    I'm enjoying my 01 GT ;) I've got a total of around $22K into the car (including the cost of the car of course) and I'm pushing around 400 hp to the wheels. It looks goooood too :D
  6. 01MachGT

    00 supercharged gt choaking

    you may have too much fuel.
  7. 01MachGT

    00 supercharged gt choaking

    get a tune. problem solved
  8. 01MachGT

    Is this a Droneless Exhaust Setup?

    wuss :p go loud!!!
  9. 01MachGT

    Just installed Steeda Upper and Lower Control Arms, (tips and tools)

    I installed my UPR tubular UCA's in under an hour :p
  10. 01MachGT

    Going to the dyno!

    Depends on what your going to the dyno for. If it's just for good dyno numbers then cooler and drier is better. If it is for tuning then you want it similar to normal driving conditions.
  11. 01MachGT

    Fuel Pump questions

    you don't want to use the walbro on a 99+ GT. It doesn't work well with the returnless style and will burn out pretty quickly
  12. 01MachGT

    This is what 13lbs does to a piston----pic

    Yeah, I had a little scare when I was swapping the plugs for my blower. I actually had a pebble fall into the hole but it was big enough so it didn't go clear through into the cylinder.
  13. 01MachGT

    "Concealed" Starter Bolt

    2' of extension and a swivel on the socket end of that, I went right past the header but it was the stock header.
  14. 01MachGT

    backfiring really loud

    Mine shoots flames a couple feet ;)
  15. 01MachGT

    car stalls when taken out of gear after cruising speeds

    well, I can't exactly reflash the computer now.... maybe I'll spritz the maf with some electrical cleaner.
  16. 01MachGT

    car stalls when taken out of gear after cruising speeds

    I don't have the screen on there with the blower setup.
  17. 01MachGT

    car stalls when taken out of gear after cruising speeds

    Well, it did it a couple of times before the blower but only when I had forgotten to attach the spring on the throttle body after I installed the shaker. It did it again today as I was slowing down and making a turn, I almost ran into an f250 cuz of it too. (steering got really stiff of...
  18. 01MachGT

    car stalls when taken out of gear after cruising speeds

    Sometimes when I take the car out of gear after cruising down the highway for a while it will stall. I'm kind of curious as to why this is. I'm guessing that the blower creates more drag on the serpentine belt and that causes the stall, but that's just a theory.
  19. 01MachGT

    WFC 8 picture gallery

    the site goes down sometimes. It's worth it to try a few times. There's LOTS of pictures.
  20. 01MachGT

    WFC 8 picture gallery

    Check out the gallery :) http://www.1320vids.com/gallery/wfcdriving/DSC07154 (that's my new background)
Top Bottom
Back
Forums
Menu