Search results

  1. S

    Blow-Thru 42lb MAF

    What I was saying is it runs like crap with or without the PMS. I am really sure it is the meter. I will change everything back to 19lb injectors and run the FMU for now and just switch it out to a Megasquirt and be better off.
  2. S

    Blow-Thru 42lb MAF

    I have tuned it with a PMS and it does not matter now since I am sure the meter has gone south for the winter. LOL I took the PMS out just to make sure it was not the problem and used this meter for years when I was Supercharged without a PMS and with a PMS and never a problem till last year...
  3. S

    Blow-Thru 42lb MAF

    I installed a Pro-M meter and converted to the new 6 pin plug to match on my '89. When the harness is plugged into the meter it idles perfect and runs great to 3k rpm then breaks up like a rev limiter. So I figure the meter is not working correctly. Well I unplug the meter harness and it revs to...
  4. S

    ticking noise...

    I will guess that you have a leak around the egr port of the intake gasket.
  5. S

    Heads lifting under boost? or blown headgasket? x5

    I would say if your having problem with 8psi and your keeping your timing under 21 degrees at WOT and have a large enough fuel pump then you are off on your tune and are detonating. I use cheap graphite head gaskets and run 14psi with 91+ octane. I would not O-ring anything since you are having...
  6. S

    Why does my e-brake light come on when I brake normally sometimes?

    Usually it means the brakes are dropping pressure. I usually find a brake caliper leaking or a bad rubber line.
  7. S

    Cobra II with T-Tops?

    To be honest every Cobra II I can remember back in the day had T-Tops. I just took for granted that the Cobra II came with that option.
  8. S

    rev limitor at 4000 RPM....?help plz

    Infraction issued. Once was enough, twice was just asking for it. -Matt
  9. S

    violent shuddering in 1st gear

    Could even be your harmonic balancer or lower pulley not tight.
  10. S

    rev limitor at 4000 RPM....?help plz

    Next time, try helping solve the problem. Zero_chance already pointed that out, there's no need to rehash it, and throw in a personal attack, too. -Matt
  11. S

    Best axle ratio for 5.0 AOD

    AOD with 4.10s feels and performs like the perfect gear. My Dad is 74 years old and loves those gears in his '92.
  12. S

    jegs vs weld draglites are they the same?

    I go into Jegs all the time and I think the Weld copies made for them look really nice and the weight difference is not probably a issue for 90% of the people. People just liked the looks of the Welds and the weight was just a bonus.
  13. S

    Strange oily plug issue

    I have a couple plugs that look the same way and have for the last 100k miles. My car does not burn oil and the electrods on the plugs are perfect. I have been using forced induction for the last 100k miles. I was Supercharger and now Twin Turbo and I think under boost the valve covers leak and...
  14. S

    91 mustang lx supercharged spitting and sputtering under boost

    Sounds like Spark Blowing Out and I don't need additional information. LOL Make sure the plugs are at .028-.032 gap and get a Spark Box .
  15. S

    Ford Mustang 79-93 90 91 5.0L V8 T3/T4 Twin Turbo Kit

    I could see how that would be a easy thing to do. Thanks for the idea.
  16. S

    Ford Mustang 79-93 90 91 5.0L V8 T3/T4 Twin Turbo Kit

    My hood keeps the temperature way down. Even after racing all day at the track the cap is not even that hot to the touch. I am going to make or get some covers this winter. I am getting bored with the car and been thinking of selling it this winter to build a new yearly car not a seasonal one...
  17. S

    Ford Mustang 79-93 90 91 5.0L V8 T3/T4 Twin Turbo Kit

    Made them with bulk pipe. It took a couple of hours, but everything fit so nice that a 90 degree elbow and some straight pipe for both sides is all it took.
  18. S

    Ford Mustang 79-93 90 91 5.0L V8 T3/T4 Twin Turbo Kit

    Never a problem as of yet. Pictures http://aaronspeed.fileave.com/052307%20TTi%20Complete%20(3)%20(Medium).JPG http://aaronspeed.fileave.com/052507%20(1).JPG http://aaronspeed.fileave.com/052507%20(2).JPG http://aaronspeed.fileave.com/100_0759.JPG...
  19. S

    Ford Mustang 79-93 90 91 5.0L V8 T3/T4 Twin Turbo Kit

    Tons. I will post some when I get home tomorrow. I was thinking I had some here on Stangnet.
  20. S

    Ford Mustang 79-93 90 91 5.0L V8 T3/T4 Twin Turbo Kit

    Been running the SSAutochrome Twins for 45k miles. Not a problem with the headers and would say the headers are of excellent quality and would hire that 10 year old from China to do TIG welding for me. I make over 500 rwhp on 10psi and the same turbos that come in the kit I use on Mazda Miata...