Search results

  1. R

    New Paint Time

    Well, it's time to throw down a new paint job on my 89 LX Stang. I've got all the body work done, and am ready for the primer and then the paint. I'll be using an Acrylic Enamel paint on this project, and am undecided if I will use a clear coat on top of that. It doesn't really have to...
  2. R

    proffessionally detailing

    Poorboys Super Swirl Removers work excellent! 3 different types to choose from depending upon how bad your car is. http://www.poorboysworld.com/super-swirl-removers.htm
  3. R

    Show off your audio/video!

    Overall, they are pretty decent. Excellent clarity, awesome highs. Could benefit greatly with an extra added midbass though. I like them. I am looking to sell them however, as the upgrade fever continues; I have plans involving Elemental's EDi line, or something with Adire's new...
  4. R

    Show off your audio/video!

    95 Tbird Sony CDX-M630 PPI DEQ-230 Illusion Audio ND6.1 Components (Doors & Dash) 2 Elemental Designs e120.44's (Installed in the rear deck) Xtant x1001 Xtant 403a Stinger Distribution Custom Wiring. 83 Cougar Alpine CDE-7859 Audio Control EQL Pioneer 6.5" components (lower...
  5. R

    Dynamat - where to put it

    B-Quiet and eDead are what I use regularly. I have over 100 ft^2 of B-Quiet in my 95 Tbird, and it works awesome. Just slightly over $100 shipped for 100 ft^2 on eBay. I also use and experiment with several types of industrial or "alternate" deadenings regularly. One thing is for...
  6. R

    Dynamat - where to put it

    While Dynamat does perform according to it's intended use; you really are paying for the name. The mark-up on Dynamat is discouragingly excessive. Have a look into a few of these: B-Quiet RamMat eDead Cascade Sound Deadening Generally you can get more than twice as much of these...
  7. R

    Carbon CleanUp!

    I'll likely pull another compression test at the end of the week and see where I stand. Likely the carbon will not all be gone, but hey, measuring progress is cool. :) Thanks again!
  8. R

    Carbon CleanUp!

    Well here's tonights Update: Changed the Fuel Pressure Regulator and the Vacuum line that goes to it. (again) and cleaned the heavily carboned plugs again. Fired it up. Smooth as can be. Problem is resolved. Mind you - without the Motorcraft Plugs, wires, cap, or rotor. :)...
  9. R

    Carbon CleanUp!

    Thanks again for all the advice. From what I gather of the car, it has not been maintained all that well by it's previous owners, has been abused a bit, and generally sat too long. Update: I pulled the vacuum hose off the pressure regulator and it dumped fuel everywhere. Looks as if...
  10. R

    Carbon CleanUp!

    I thought about that too, however, I kind of nixed that, as the car does not overheat, use any coolant, and holds pressure when I pressure tested the cooling system. The car runs very rich. Exhaust has a strong chemical smell to it. Exhaust sounds like crap. Like its running on 2-3...
  11. R

    Carbon CleanUp!

    Update: Had the car Computer Timed today. It's perfect at 10 degrees. Also did a compression test. This not so perfect. Compression Test ----------------- Cyl 1. 180 Cyl 2. 180 Cyl 3. 125 Cyl 4. 180 Grumble Grumble. Thinking it is possibly a...
  12. R

    Carbon CleanUp!

    Update: I ran the Sea-Foam through the vacumm in the intake. Let it sit for a good half hour, fired it up and took it out for a spin on the highway. Tried to keep 2.5k to 3k RPM on the tac most of the time as well. It does seem to run a little smoother, however, it still has a...
  13. R

    Carbon CleanUp!

    Thanks for the suggestions! Car has 131k on it. I just replaced the transmission fluid/filter about 125 miles ago. Fuel Filter is brand new as of 25 miles ago. Plugs are Bosch Platinum. Cap, Rotor, Wires, are all the Premium kind from Car Quest. To clarify- it does not burn...
  14. R

    Carbon CleanUp!

    Hey all, I recently purchased an 89' Hatch 2.3L N/A Auto Transmission, and it has been causing a few problems. Basically, it's idle sucks. :notnice: It jumps from 800 to 1500 RPM slowly, and at random. It just idles a little then acts like it is going to die, then picks itself up...