Search results

  1. N

    94/95 Matser cylinder and booster

    hey Im currently in the middle of my sn95 brake swap. If you are using the stock rear axle hardlines you will need an adapter for both sides. If you are using the 98 soft lines up front you will need an adapter for the passenger side. Sorry i dont know the exacts on the adapters, but matt...
  2. N

    tranny cooler line ?

    If you replaced your rad with an aluminum one, your problem sounds like exactly what happened to me. I ended up cross threading the fitting on the fragile aluminum and ended up stripping it. I just got an external B & M tranny cooler, and had no problems since.
  3. N

    How much $ to install gears

    i can understand having the tubes welded to the center section of your rearend, but what is the advantage of having 9 inch ends welded on? sorry to hijack
  4. N

    wheel offset questions with sn95 brakes

    hey guys i am going to upgrade my brakes on my 91 GT using the sn95 parts (except axles). I already bought some afs wheels, 17x8 +12 mm offset fronts wheels and 17x9 +36 mm offset rear wheels. My question is can i run those wheels with fox length axles? It says here http://svo73mm.cjb.net/...
  5. N

    aftermarket axles with sn95 brakes

    I know what your thinking not another 5 lug 4 wheel disc question, but i searched and found nothing. I also looked here http://svo73mm.cjb.net/ and it doesn't say anything about using aftermarket axles (like moser strange etc) with sn95 brakes. Since most aftermarket c-clip axels keep the...
  6. N

    lowering springs; specific vs. progressive

    thanks for the reply, i now understand
  7. N

    lowering springs; specific vs. progressive

    hey guys I would like to lower my mustang but I dont know the difference between progressive and specific rate springs. Could somebody please explain them to me to help me in my decision. thanks in advance
  8. N

    moser c-clip axels with c-clip eliminaters??

    hey everyone, i am just starting to modify my mustang and i am thinking of making it handle and stop before any big power. So what i was thinking was to get a 31 spline eaton diff with 31 spline, 5 lug axels to compliment my disc brakes. My question is if i buy the moser 31 spline c-clip...
  9. N

    automatic transmission shifters

    yaeh i was thinking about a b and m but the guy i was talking to at the WFC said they have had problems with them because they use the same gate (or something like that) as gm cars. Can any one validate this? He could have just said that though so i would buy there shifter.
  10. N

    automatic transmission shifters

    Hey guys, I just bought my mustang two weeks ago, and the other day I bought an artcarr full manual valve body and 2500 rpm stall converter at WFC7 so i could liven up my AOD. My question is should i go with a new shifter? the stock shifter is pretty sluggish and i wouldnt want to...
  11. N

    Mid West If You are in AR KS IA MO MN NE ND SD Register here

    St. Louis, Mo just bought a 1991 black mustang gt hatch two days ago, so you can ignore my member name
  12. N

    anybody in the ST.Louis area

    south county here just bought a 91 gt today
Top Bottom
Back
Forums
Menu