Search results

  1. emcobra

    My latest Video and Dyno numbers :)

    Car looks and sounds awesome :hail2: :hail2:
  2. emcobra

    ordered the front and rear Bullit brake kit.

    http://www.corral.net/Tech/Suspension/CobraBrakes/CobraBrakes Nice write up the project I have been wanting to get those too. Pics when finished !
  3. emcobra

    New Coat of Wax

    Thanks, yes got them all. I even had a couple Air hose marks on a fender from when the cover fell off, those are gone too. It's an awesome product.
  4. emcobra

    New Coat of Wax

    First time using the Meguiar's 3 step and WOW. :banana: My car has a few beauty marks, chips, dings, etc from previous owner and was covered in swirl/spider lines. I washed then went through the 3 steps yesterday now I wish I took a few pictures for before and after.
  5. emcobra

    Underdrive pulley belt clearance

    Well that good to know on the clearance, Ill give it few days see if stretches out a bit.
  6. emcobra

    Underdrive pulley belt clearance

    Ok I installed a set of ASP Aluminum UD Pulleys removed smog and routed belt like this pic below. I ended up with a 89.5” belt fit nicely but the clearance between the water pump pulley and the idler pulley is very tight I’m talking 1/8 to 1/16 of inch with belt on. Is that normal? :shrug...
  7. emcobra

    Header install

    Well its done, :cheers: thanks for the encouragement I ending up getting that front bolt with a swivel ¼ socket and 2 long extensions from underneath. Any that a ¼ drive wouldn’t fit were open end wrench. I installed Mac longtube, Prochamber H-pipe, Flowmaster American Thunder cat back, ASP...
  8. emcobra

    Header install

    Ok I must be missing something how are able to get the front bolt in on drivers side? :mad: I have spent a couple hours working on just the bolts on the driver side... please help :bang: :uzi:
  9. emcobra

    A/C delete kit ??'s

    Heres a link to the 50resto kit they have some instructions that may help. http://secure.50resto.com/product1.cfm?SID=1&Product_ID=2515
  10. emcobra

    347 stroker finished, and runs! (PICS)

    DAMN !! :worship: :worship: :worship: That's some awesome custom work.
  11. emcobra

    Tri-Ax or Pro 5.0 ....

    No experiences with the Pro 5.0 but love my Tri-ax.
  12. emcobra

    spark plug wires

    So Looks like Livewire over the Taylor ? Stangfreak95: which taylors are those? This 409s look bad. http://store.summitracing.com/partdetail.asp?part=TAY%2D79658&view=257#largerimage
  13. emcobra

    where can i get the 345hp crate motor?

    Here are a few more. http://www.roushparts.com/crateEngines.asp
  14. emcobra

    Intake Shootout

    No doubt, I definitely plan on new heads but they are looking like fall project. The intake upgrade will happen in week or two. So won’t be getting full potential out of upgrade until after heads. Maybe I’ll go Performer or Street Heat either would be good with heads too… Thanks for the...
  15. emcobra

    Intake Shootout

    So looking to get an intake what's the everyone think? Trick Flow Track Heat EFI or Edelbrock Performer RPM? Be replacing Mass Air as same time. Little background 95gt Vert, MAC LT header, Prochamber, Flawmaster cat back, 3.73 gears, Homemade Cold Air,BBK Adjustable Fule reg, Steeda...
  16. emcobra

    EGR and Smog Pump Eliminator Kits

    Can't seem to find information on EGR removal/Need. Is it worth keeping ? My Smogs already gone. Getting ready to put in a set of new long tube headers be a good time to remove if worth it. :shrug:
Top Bottom
Back
Forums
Menu