Search results

  1. 6

    what springs to lower a '65 6 Cyl 2+2?

    I bought some front coils front NPD, they are listed in their catalog as 440# 1" drop springs. They are great springs for a six car.
  2. 6

    Lightly Used Leaf Springs

    Lol thanks for pointing that out! For some reason I had a brain fart and though pr meant per spring but I guess that means pair. New price, 50$ for both + shipping
  3. 6

    Lightly Used Leaf Springs

    They are off of my 65 and have ~4000 mi on them. They are a standard 4 leaf, leaf spring. They were purchased from Laurel Mountain Mustang in 2004 and I think they are made by JRS, at least that is what is painted on them. They do not come with the shackle bushings. The front bushings are still...
  4. 6

    WELD RACING PRO STAR FRONT RUNNERS w/TIRES

    Listing these for a friend Pair of weld racing 5x4 1/2" front runners with ET FRONT tires Tire size 24/4.5-15 rims are pretty clean, could use a re polish. Tires are BRAND NEW Don't have the lug nuts. 350+ Shipping email if interested, [email protected] Link to pics...
  5. 6

    We bought a fastback.....what to do

    408, F Series Procharger, intercooled, jerico. End of story.
  6. 6

    How much HP.... 302

    If you are on stock heads, I would guess 200 to the wheels
  7. 6

    Purpose of Steam Holes?

    Had the same problem when installing 65 289 heads on a new roller block, I did not drill the holes. The general consensus I got was it did not matter if you drilled the holes.
  8. 6

    Cam Break in

    The w/p has sealed bearings.
  9. 6

    Oil pan/Timing Cover off - Should I replace chain/pump?

    If it is a stock pan, I wouldn't put on a high vol. or high press pump. The pump could suck all the oil out of sump before any gets a chance to get back down to the pan. Put a mechanical gauge o/p gauge on it temporarily a see what you have, the stock gauges are not too accurate. Also check...
  10. 6

    Took some pics of my progress

    interested to see it on some corner scales when done
  11. 6

    When should you manually prime an engine

    Crank it with the coil wire off until you see pressure
  12. 6

    4 speed shifter shopping.

    Ratio411- Did you have to cut the tranny tunnel to get that to fit?
  13. 6

    Post them pics!!!!!!

    boss- car looks great! you should cut that heater hose down some!
  14. 6

    Post them pics!!!!!!

    Those gt wheels are where its at...
  15. 6

    GT40p Heads on a stock 66 289

    Get a length checker and check to be sure. Pushrod length is NOT something to guess
  16. 6

    not about mustangs, but jeez.......

    yea someone is clearly bidding it up Anyone who pays that money for that pile of crap deserves to get screwed in that deal
  17. 6

    302? or not..

    Look at the block behind the intake manifold, if its dished its a 289, if its a flat pad 302 The only year this doesn't hold water is 68 when for used 302 blocks for some 289s....
  18. 6

    non roller cam/lifters in roller block

    That a bummer with your motor.... They had piece of paper separate from the install instructions in my box describing the oil to use etc. Your cam card should have a grind date on it to see how old it is...
  19. 6

    non roller cam/lifters in roller block

    When did you purchase this cam? I bought a comp flat tappet cam back in about September or October and got a instruction sheet stating specifically to use Rotella T and a bottle of GM's E.O.S or an equivalent supplement
  20. 6

    Can anyone help me ID this classic stang?

    I thought some early fastback had the cooling things....carryover parts ford had laying around or something
Top Bottom
Back
Forums
Menu