Search results

Is there a source for the trunk lid bumpers for a ‘96? In the picture, it would have been a rubber pad or plastic on the end of the spring in the center of the photo. I looked at National Parts Depot and couldn’t find them.

I am installing a fuel pressure gauge in my ‘96 Mustang Cobra. It requires a 12V switched hot—as my car is really low mileage I really don’t want to tear the dash all the way apart or cut the harness up, any ideas on an easy to get to 12v switched source under the dash? I thought about the...

The clutch is out of my '96. It has a Procharger and makes about 425 horsepower at the wheels. Does anyone have a recommendation for a clutch that can take the abuse but still offer decent pedal effort/driveability? I have been looking at the F1 stage 3 clutches on eBay with both the Fidanza...

Well, I discovered the stock clutch does not hold up long behind 500 horsepower. I thought it smelled funny when I came home a few weeks ago. Turns out the clutch is fried. The pedal is all the way up and the auto-adjuster appears to be completely adjusted. It still engages, but I am not...

Probably a simple question, but I want opinions on running 10W-30 in my '96 Cobra. Spec is 5W-30, not sure if it makes that much difference. Car is very low mileage (under 9,000). Your thoughts?

I seem to remember someone on here had a wheel opening lip roller. I need to rent or borrow one--can anybody help me out? Thanks!

I need front brake hose brackets from a 65-66. Anyone have a parts car with set they want to get rid of? Need them for my Mustang Steve Cobra Brake conversion. Thanks! http://www.streetortrack.com/files/vmf/brakelineclip.jpg

I am finally putting my 69 Mustang back together after painting a few weeks ago. First order of business was rear axle. When I went to test my new wheels on my 9", I found the wheel studs are too short. Does anyone know what part number/brand I need to order to get a 1/2" longer press in...

How wide of a tire can you put on stock rims on the rear of a 96 Cobra? What is the rim size (17 by ?)?

It has been a loooong time since I had a Mustang with an Automatic transmission. Back when I and my Mustangs were younger, you could go to the store, almost any store, and buy Type F fluid. After shopping high and low, all I have found locally is Type FA. Is that good enough for my 72 Mach...

What size are the stock injectors on a 1996 Mustang Cobra?

I have a few extra parts taking up space I would like to clean out. The large items I do not want to ship: - Right Fender (71-72), no rust $100 - Right door (71-73), there is some rust in the inside front corner, but not on the outer skin. $50 - Urethane Front Bumper (73), this one is...

I made my own Shelby drop template tonight. After rechecking the "new" holes on the template, one is .020" off from the other one. Basically one hole is slightly lower than the other hole. That isn't a lot, do you think that would be a problem or should I make a new template? (Sorry, but...

Does anyone have one of the Shelby drop templates and drill bits that I could rent or borrow? I have a paper template that I could apply, but I don't want to be "off" when I do this as there is only one chance to get it right! I have drill bits up to 1/2", but as you know this needs to go...

I recently bought another car, a 72 Mach 1. With it came the original block and it is stamped on the left rear side with the VIN number. I have personnally verified the number/match. The car is an "H" code 351 Cleveland 2 barrel, automatic, tach, fold down, A/C, console, etc. The car...

Ok, I am confused. You can buy a Tremec TKO swap kit which includes a bellhousing from some places advertised as fitting 289, 302, & 351. Other places sell a kit with an adapter/spacer to install the TKO with your original early style bellhousing. As I am cheap, I am not willing to spend the...

Will a late model T5 bellhousing bolt up directly to a Tremec TKO500 or 600 or do you have to have an early bellhousing and adapter?

Well, a bittersweet day and end to a long weekend. I took my 73 Fastback to Pomona this morning and sold it. The car was awesome to look at and drive--always getting thumbs up and waves from other people on the road. :nice: But, now I have room to get back to work on my '69 restoration. And...

Does anyone know if there are ever any good swap meets in Denver / Colorado Springs / Fort Collins / etc? I travel there on business quite frequently and am looking for ways to make business travel suck less. :rolleyes: Same question for Seattle and Portland for that matter! Thanks!

Looking for a fan shroud for my 73 Mustang with the big radiator. I have a 351C and A/C. PM if you have one.