Search results

  1. E

    1993 Cobra W/F303 cam

    We did not use a degree wheel we aligned the dots and used a straight edge in the center of the key way on the crankshaft and centered it with cam shaft and made sure the dots on each of the timing gears were along that straight edge.
  2. E

    1993 Cobra W/F303 cam

    I tried it and it sounded better at idle but when I drove it it still ran like a dog. What RPM should I set the idle at for initial time without the spout?
  3. E

    1993 Cobra W/F303 cam

    No, I'm not sure what you are talking about. Can you explain
  4. E

    1993 Cobra W/F303 cam

    Yes, the cam was properly installed this was the first time I replaced a cam but I had a friend from work help me with it he use to race in some pro class but he is not here today to help with timing but he said to set it to 10 degrees BTDC and lock it down and i did, so where is the most common...
  5. E

    1993 Cobra W/F303 cam

    I just replaced the stock cam with a f303 cam and got the timing set to 10degrees BTDC and when I first mash on the gas it backfires thru the intake. What could be the problem? :bang:
  6. E

    1993 Cobra W/F303 Cam

    I just replaced the stock cam with a f303 cam and got the timing set to 10degrees BTDC and when I first mash on the gas it backfires thru the intake. What could be the problem? :bang:
  7. E

    1993 Cobra w/ F303 cam

    I just changed out my cam to an F303 cam and I set the timing and got it fired up and it now backfires thru the intake when I first mash on the gas. WHat is the problem? :bang:
Top Bottom
Back
Forums
Menu