Search results

i have heard that VT makes a good mod motor.

i was actually wondering about doing that also. but didnt know if anyones made stuff to do it.

i never got mine. they sent me a 86-95 one. that apparently doesent fit that car either.

mine rubs the inner fenderwells in the front. might check that out, just get a flashlight and see if there is any spots where it looks like it been rubbed.

well, first your going to want to do a big burnout. then it really depends on the car i would go for 4k and slip the clutch out. your track may be slicker than the local roads like it is around here. you might want to make a few runs to see what works best. on the street i always found that i...

my camber was visibly off, although the alignment was not that bad. still needs it though. my car rubbed with 17's but only on full lock turns or if the susp. got compressed in a tight turn. i have since gone to c-springs because they felt a little stiffer and the car seems to handle better with...

should have got a real X, like mustangtuning or magnaflow. they sound much better. the BBK and Bassani are more like an H with rounded edges, not really an X.

i helped my brother put SLP's on a few weeks ago. did you run into any trouble with fit or anything. i have been thinkin about getting the flowtechs. cause they are cheap but didnt know how they would fit.

11 is pretty rich, probably power to be had there by leaning it out to about 13:1. you can buy a MAF housing for that, or use a tuner i think.

get a wet shot and another thing to consider is that Zex and other companies rate thier jets as flywheel HP, i know that NX and another company rate their jets with RWHP. i would go with the NX kit. try looking around in the poweradder forums on here and also on modulardepot.com and...

i do believe the exhaust is made of stainless steel, so longevity shouldnt be an issue with the stock exhaust. personally if you dont want to change the sound of the exhaust i would leave it stock. if you want a little more performance you could get an aftermarket H-pipe with Cats. i have not...

i rub on the plastic inner fender when i turn full lock sometimes. and i have stock wheels and tires. if its a problem i bet you can take the inner fender out.

i have a question here, the tag on the diff calls for 75-140 synthetic, so i bought valvoline synpower. on the bottle it says limites slip after the weight. and on the back it says its made especially for limited slip differentials. so i bought friction modifier from ford and used it too just to...

i just put my Mustang Tuning AKA Pypes X-pipe on. it sounds pretty good with them ravin mufflers i had welded in at midas. kinda like flows, but kinda not. its hard to explain. install went well and the pipe fit great. only problem is first time around with the failed UPR install, i broke the...

the UPR pipe is on backorder, i tried to order one. the just sent me the 95 kit thinking it would work i guess. then when i call and tell them they sent me the wrong pipe, they told me they would "send a new one out today". so i call back a few days later to ask when it might be here, and he...

i may have just found the problem, ill keep you guys posted, feel free to add anything.

so my buddy just bought a 96 GT, nice looking car, its black with a cobra R hood and clear headlights and corners. anyhow, it blows the front pass. side O2 sensor out of the bung, which is stripped out. we fixed that for now, but it threw like 4 codes. P1506 or P1507 i think, something to do...

so im going to order a UPR O/R X-pipe. im going to put it on with the stock catback for a few months, and im wondering about a couple things. one of which is how is it going to sound? anyone have a soundclip or know where i can find one? and two, what kinda HP am i leaving out there by not...

i was in the same position as you about a week ago. my 98 just needed more power. i have about the same mods as you, and ran 14.1@96 mph. then i traded my car in for an 01. the car is so much stronger up top its unbelievable. my buddys 89 PGT with exhaust, boosting 15 psi, and IC pipes walked me...

my 01 i just bought shifts like butter and it has the 3650 in it. is there any way to tell if the TSB has been done? my tranny has packaging tape that says "Tremec original equipment" on it.