Search results

  1. D

    97 GT PI HEAD SWAP DYNO SHEET INSIDE

    you can run comp 270's once you get your pistons flycut.... Just get comp 262's and you don't have to worry about any ptv contact or degreeing... at the beginning of this thread it was stated that the full pi swap only gabe him 260hp. I've read many other forums where guys have done the...
  2. D

    help with damaged brake line

    you will need a new hard line.... There is way to much pressure for that rubber hose... What you could do is go buy a flare tool and flare the ends and then put your new STEEL line in between.. THis beats running all new lines......
  3. D

    pi cams/intake on npi motor

    ya your rite. The main power will come from the intake and cams...... Good luck w/ the install and take some pics to share w/ us>
  4. D

    pi cams/intake on npi motor

    when you get this swap done you might want to consider getting a good tune........ instead of swapping the cams w/ pi cams i would go ahead and get some comp 262 and put in there....... Don't go anything w/ a higher duration than that b/c you'll have ptv contact........ Unless you flycut the...
  5. D

    comp 270 issues

    I've never heard of this before. I've heard of flycutting the pistons and modifying the bottem of the valves to clear ptv but not by putting in .600 lift springs.
  6. D

    comp 270 issues

    You also have the full pi motor.
  7. D

    comp 270 issues

    yes, i am aware of the ptv clearance w/ these cams. I really want to use them but i may have to notch out the piston tops for valve clearance.....
  8. D

    comp 270 issues

    When i do my full pi swap in my 98 gt i am wanting to put comp 270's in while i have the heads out. I've read on here that it is a good idea to degree the cams. I've got no experience doing this. So my question is it possible to degree them w/o the the heads actually on the motor? B/c i was...
  9. D

    Dyno tune in Ohio

    Really and what would that run me? A dyno tune would be better but damn 500 bucks? geeesh
  10. D

    Dyno tune in Ohio

    Getting ready to do a full pi swap on my 98 gt and will need a tune.
  11. D

    Dyno tune in Ohio

    How much does it cost for a dyno tune? i've heard around the 400 dollar range?:shrug:
  12. D

    Dyno tune in Ohio

    Where is there a good place to get a dyno tune in ohio? I live in Mansfield about 45 min. North of Columbus.............. Thanks
  13. D

    99 saleen heads

    Are the heads off of a 99 saleen windsor heads or romeo heads?
Top Bottom
Back
Forums
Menu