Search results

Up for sale is my old 351efi tfi mustang distributor, i had the unit on my car for about 3 years with no problems, served me well and still is worthy of some more fun! i had bought the dist from a electrinics exhibit at a auto show, so i am un sure of brand. But i do no its set up for a roller...

Very lightly used RPM Outlet Motoblue IRS hard launch diff brace, These braces provide 45% more atachment points equaling greater strenth and durability, CNC Billet aluminum structure with all grade 8 12pt hardware included. I had this brace on my 03 Cobra for a season about 700 miles. In near...

1 7/8 KOOKS 351w swap headers mustang foxbody, These headers are primary tube 1 7/8, 3'' collecter size, 2.5 inch bolt spread in the flanges,jet cermic coated inside and out(when done).the collectors have 02 bongs welded in if you may need to run on efi car or wideband. These headers have been...

for sale is a set of 32 valve dohc heads that came off my 2003 lincoln aviator complete with cam shafts and factory black valve covers. Also have the rare Aviator intake manifold great performance to your mach 1 or turbo cobra. Also have factory ford 24lb injectors that were on the engine the...

Hey guys I been trying to chase this problem down for alittle while now, i have a 408w in my 88gt efi victor manifold 36lb injector 80mm throtle body 85 pro m meter, car is a 1988 with no maf from factory, I did the conversion years ago with no problems in the past, just recently my car...

hey guys, i been around messing with mustangs for years now and i have a pretty good idea on what works and what does not work, so today i installed some suspention parts on a buddy of mines mustang{1991 coupe}, cars pretty stock, headers, h pipe, catback, dual friction clutch, removed all front...

[/IMG]

http://www2.snapfish.com/slideshow/AlbumID=256462217/PictureID=6533490760/a=160935868_160935868/otsc=SHR/otsi=SPIClink

hey guys hows it going? I dont post much but i am a regular reader. My question is, I have a 408 stroker in my mustang. I am running the victor 5.8 efi manifold, this manifold does not have a pcv valve. My valve covers have a breather piped into them, it is a -12an line that runs to both covers...

Hey guys, Hows it going. I have a 351 based engine stroked 408 toped with a set of edelbrock vc jr cylinder heads. These heads have a 2.00inch header bolt pattern. I had bought a set of kooks headers from kooks while ago, knowing they make a adapter plate for my conversion. And come to find...

hey guys, Hows it going guys? I have a question about longtube headers into a foxbody car, My setup is a 408w motor in a 88gt i have a qa1 k member and a c4 transmission. I am looking into longtubes and i am seeing that they are a pretty penny, What i am questioned about is if you can fit a...

hey guys, I know theres a ton of info on the 3G alternator swap but i just cant find what I"m looking for. So here goes i hope you guys can help me i have my battery swaped to my trunk with a Summit brand master disconnect battery switch mounted on the back bumper, this switch is only...

I recently came across some coated 351 swap bbk long tube 1 3/4 inch. What i was woundering is if they will still work with my 302 application? I understand the deck high is the only difference on the 351 vs 302,But if i understand this right that will just mean the headers will just sit closer...

hey guys, I came across some coated bbk 351 swap longtube headers for pretty cheap, In my car now is a 306ci. So what i am woundering is if they will fit? I understand that the deck hight is the difference between the two motors, So will this just mean the header will be a inch and a half...

hey guys, What im looking to do with my valve covers is to loop a stainless steel line from cover to cover in the rear of them, maybe like a 10an line. I heard this will let my engine breath better in the higher rpms? have you guys ever heard of such a thing? My main question is if maybe i...

hey guys, Allright it went like this.... I started my car about a week ago, it went fine, I parked it and turned the battery switch to the off position. Then after this snow storm we had in mass, I went out to start it up and clear it off and my battery switch was frozen, I worked it back...

hey guys, my car has been giving my alittle trouble now that the cold weather has moved in. When i go to start my car it will start right up no problem then it will stall out on me, then when i go to recrank it over it just cranks and cranks for a couple mins will not turn on. (kinda...

hey guys, my car has been giving my alittle trouble now that the cold weather has moved in. When i go to start my car it will start right up no problem then it will stall out on me, then when i go to recrank it over it just cranks and cranks for a couple mins will not turn on. (kinda...

hey guys, my car has been giving my alittle trouble now that the cold weather has moved in. When i go to start my car it will start right up no problem then it will stall out on me, then when i go to recrank it over it just cranks and cranks for a couple mins will not turn on. (kinda...

hey guys, I picked up a alternator out of a 2003 ford taurus, The alternator is rated at 110amp (so its alittle better then stock). The brackes are the same as mine it looks excatly like the 130amp in the 94 mustangs, but the only difference is that it is missing one plug, The single white...