Search results

  1. M

    Post Pics Of Your Notch!

    interior pic
  2. M

    Post Pics Of Your Notch!

    not good pics but here ya go.
  3. M

    MAKES NO SENSE!!!!!

    My guess is your timing is off just a little. try lifting the distributer out just enough to turn the rotor, and turn it just enough counter clockwise to move it one gear tooth. That little bit will make it seem like its not firing at all to starting right up. It's happened to me. thought i had...
  4. M

    Powerdyne?

    Does anyone know what the difference between the 86-93 and the 94-95powerdyne BD-11a kit is. I know the pipe between the supercharger and throttle body will be different but is there anything else. Reason is I have one for a 86-93 and someone wants to buy it for their 94 if it would work...
  5. M

    Strange Alarm Like Sound Behind Dash

    I think it might be your airbag alarm beeping. mine does it when i first turn the key on and about 30 minutes later. i think it will do it when the light for you airbag indicator in the cluster is burned out or disconnected. mine is disconnected since i put in all autometer guage cluster. my...
  6. M

    TW heads and removing roller lifters?

    the heads hang over the lifters. the push rods go from the lifters THROUGH the heads to the rockers. the reason i am asking is because i think when i did the head and cam swap i tried to pull the lifter out but it hit the bottom of the head. but it has been a while since i did it and i dont want...
  7. M

    TW heads and removing roller lifters?

    Does anyone know if i have to remove the trick flow heads to remove the lifter? Or can it be done with them still on? Thanks in advance>
  8. M

    flaming river shaft?

    i have the FR unit on 2 different mustangs a 87GT conv and a 91 coupe. improved the performance on both by alot. and yes it will clear long tubes i have bbk's. installing on both cars was easy and i did not have to trim or modify anything. i never dealt with the other brands so i can't say...
  9. M

    Swooshing sound after a cold start....?

    you are low on coolant(air in the system). the sound is coolant going through your heater core. when it heats up the coolant expands and fills up the empty space and thats why you don't hear it when it warms up.
  10. M

    Long Instructions for Convertible top Install

    You can download the one from late model resto. I think its only a few pages though. It's the one i used and it seemed pretty easy and quick.
  11. M

    36's or 42's

    which size injectors should i go with? i have a stock bottom end. kenn bell supercharger with 8lbs of boost and i am adding trick flow heads and an f cam. i'm thinking the 42's will give me drivability problem when not in the boost, but will the 36's be enough without an fmu. any help is greatly...
  12. M

    ACT sensor bad?

    getting a code 54, replaced with a new ACT sensor and still getting code. measured the voltage and got 4.72 from one wire. reference wire i'm guessing. and .10v from the other wire. all the info iv've read .60 is the lowest it should be. the temp here is high 70's and the engine temp was at 160...
  13. M

    kenne bell feul pressure setting?

    just got a 91 coupe with a s/c 9# boost(kenne bell) it has stock injectors (19#) maf and t/b. the feul pressure with the vacuum off is at 64# which seems really high vacuum on is around 50#. seems to run rich(black smoke and gas smell)it has the k/b fmu. feul preesure will go to about 80# with...
  14. M

    Does anyone know the part# for the WOT relay?

    None of the parts stores here can find i, even the ford dealer has no clue. It's the relay on the pass. side fender well w/ four wires going to it. It shuts the A/C compressor off when you are WOT. Mine kicks it off but won't let it come back on I have to disconnect it for it to send power back...
  15. M

    Where to find a 89 Cluster 140mph?

    I got the entire pod for $25 at ecology auto on 27th ave. From an 89 and it had the 140 speedo in it. All mustang in tempe would have it but prob cost more. Ecology you have alot of walking around looking in everything but the price is usually worth it.
  16. M

    need help, out of ideas!!!

    No codes at all for KOEO, KOER and cylinder balance test. It has a CAI the air filter is inside the fender. The TFI was tested 3 times. Don't know what the feul pressure is yet, trying to get a hold of a gauge. Also when I changed the plugs they seemed a little white like it's lean. Not tan or...
  17. M

    need help, out of ideas!!!

    my problem is when i'm over 3k and near WOT and up to WOT it will start missing. I changed the feul filter, plugs, feul pressure regulator, coil, had the TFI tested and good, ohm tested the wires and all are good. Can't find any vacuum leaks(checked with propane and also ether) Timing is good...
  18. M

    need help, out of ideas!!!

    my problem is when i'm over 3k and near WOT and up to WOT it will start missing. I changed the feul filter, plugs, feul pressure regulator, coil, had the TFI tested and good, ohm tested the wires and all are good. Can't find any vacuum leaks(checked with propane and also ether) Timing is good...
  19. M

    Anybody Know what Is Wrong here?

    I had the same exact problem. Mine was the ignition switch. $12 for a new one. Fixed it.Sounds strange but true. Mine would go up at least a notch on the gauge. Turn my A/C on high and it would instantly rise, turn it off and would go back down. Any time I put a load on the electrical it would...
  20. M

    feul pressure regulator

    Does anyone know of an easy way to swap the feul pressure regulator. Tried earlier to swap it but ran out of time and had to put everything back together. :notnice: Can't get to the allen heads that hold it on except for one of them. All help and suggestions are appeciated. Thanks
Top Bottom
Back
Forums
Menu