Search results

  1. lightblade

    07 GT rear brake stuff

    All off my 07 GT low miles (street miles). Rotors, dust shields and hardware, brake lines, and pads with lots of meat left. Everything's in great shape just a little bit of surface rust on the rotors that will come right off as they have been sitting for a year. $125 shipped obo. UPDATE...
  2. lightblade

    Mcleod Billet Steel flywheel 96-10

    http://www.stangnet.com/mustang-forums/843063-mcleod-billet-steel-flywheel-96-10-a.html#post8481817
  3. lightblade

    Mcleod Billet Steel flywheel 96-10

    This flywheel is new, zero miles, only fitted with RST clutch and installed on the crank. Turns out there is an issue with the rst which will be removed. I went to an ACT clutch that came with its own flywheel, so I'm selling this. Part number # 463406 I paid $379 for it last month...
  4. lightblade

    Edelbrock manifold going on TT mustang *PICS*

    I actually laughed out loud after reading this. I think I use to write papers in 5th grade where I put first, second, and third at the beginning of all my paragraphs hahhaha! My question was rhetorical, I didnt know you were so sensitive,( well i thought you might be thats why i made the...
  5. lightblade

    Edelbrock manifold going on TT mustang *PICS*

    Yes and no, high rpm is normally where the weak link will let go which is the stock rods, plus he doesnt run that boost, it says he normal keeps it down to 9psi so thats just a run for a dyno pull he did. I posted 2 vids, here is the one that has rpm as well I have an open wastegate that...
  6. lightblade

    Edelbrock manifold going on TT mustang *PICS*

    Some info of turbine housing TurboByGarrett.com - Turbo Tech102 Turbine A/R - Turbine performance is greatly affected by changing the A/R of the housing, as it is used to adjust the flow capacity of the turbine. Using a smaller A/R will increase the exhaust gas velocity into the turbine...
  7. lightblade

    Edelbrock manifold going on TT mustang *PICS*

    So your saying your car is setup for the track? Is it stick or auto? Ever run it down the 1320? I bet it cant even make full boost in first gear. You dont have enough motor to spool that setup which is sad since its twin turbos. That looks like a setup you would see 400+ cube motors or that...
  8. lightblade

    Edelbrock manifold going on TT mustang *PICS*

    Found your graphs. You have almost no power band/spool its like you dont get full spooled till 5000 rpms no boost curve though. Looks alot like a centi supercharger graph. Very weak for a twin trubo setup to say the least...
  9. lightblade

    Edelbrock manifold going on TT mustang *PICS*

    Where back presusre becomes an issue for overall power is after the turbo(s), not between the engine and the turbo, once the cars at target boost and the wastegate is fully open theres almost no back pressure here sense the pressurized exhuast coming out of the engine is just going right out the...
  10. lightblade

    Tank_567 Turbo build

    The good thing though is that where the pipe is lowest under the k is even with the wheels so it raises up with the car when you go over bumps and stuff. My under k-member pipes are right by the wheels too, no issues.
  11. lightblade

    Tank_567 Turbo build

    Damn Bobby! At least it was just the intake and not the motor! My frpp composite manifold is holding up pretty good at 16psi :). I will try to give you a call this evening, I need details lol
  12. lightblade

    One Thing Leads to Another...

    +1 for a tru-trac! And btw the stock 31 spline axles are plently strong, you just spent money to have ones that say moser instead. I used syhthetic with friction modifier, works good/last long time. lol On a side note as well you can buy the the carbon fiber clutch packs and put them in...
  13. lightblade

    Has Ford Racing fixed the 3v intake???

    Not due to the tin-canning/flex, the gasket got unseated at a weak point where the 2 parts of the manifold bolt together and it was under lots o-boost. 20+psi. I picked up peak gains 30-35rwhp throught out the curve from 3000rpms on up my turbo setup. An im currently running 16psi no...
  14. lightblade

    HELP!! BBK Throttle Body

    +1 check the code. Also, your gonna need the tune adjusted, These cars are finicky about intake mods. Sounds like you forgot to hook something up or have a vac leak.
  15. lightblade

    Intercooler

    Sold!
  16. lightblade

    Intercooler

    TTT
  17. lightblade

    Tank_567 Turbo build

    Yeah def gonna use up that rubber now! sounds like a plan. Heck yeah i could def use the help. I still remember when my cai/tuner came in the mail and you were like lets put in on now!lol, remember.. 295!!! lol Gonna start again sat and take pics of course. The on3 kit came with heat...
  18. lightblade

    Tank_567 Turbo build

    Awesome bob! I'm very impressed with eric's welding skills! Love the torque numbers, hows first gear? hahah. I will jumping head first into my build this weekend! Im going to loosely bolt up the hotside so i can see turbo placement, gotta clock the turbo to where i want it, and finish fabbing...