Search results

  1. 9

    Pullys ¿ ¿ ¿

    There's better ways to get 5hp.Underdrive pulleys are great if your only goin to the track,where you need the few extra ponies,but for the street they suck.Its a cheap mod,and it will give free up a few hp,but in the long run,they're not really worth it.Poor charging at idle,higher engine temps...
  2. 9

    Going to a breather setup over a PCV

    A one way check valve will not allow boost to pressurize your crankcase.A stock PCV system usually lets boost by the valve,which is not good.AnAir 50psi check valve,or something simular,will solve this problem,that is also why you will always see oil breather caps on boosted cars,to relieve...
  3. 9

    Going to a breather setup over a PCV

    Hmmm,...me thinks that might be part of the problem,...go to your local ford dealer to get the screen,should be 10 bucks.Might as well slap on a low profile oil breather while you're at it. Also,make sure that the actuall pcv hose isn't clogged,...try blowing thru it,if you can't,change it.
  4. 9

    Symptons of a Blown Head Gasket?!?!?! JR!!!!

    I hate to say it,but you already have the answer in your oil pan.Head gasket most likely,if not,...maybe you have a warped or cracked a coolant passage on the lower intake.Sorry man:(
  5. 9

    Going to a breather setup over a PCV

    Have you checked your pcv yet?Did you check to see if the wire mesh under the pcv is clogged?What's your oil pressure at?Unless you are doing some severe engine braking(hard downshifting),you shouldn't have any issues with oil coming out from anywhere.You can run a valve cover breather and a pcv...
  6. 9

    supercharger questions

    "Engine compression has nothing to do with fuel pressure. With a blower and 10psi probably 420HP or so. That's if tuned correctly on a dyno. I think you could keep the injectors you have now and occasionally spray a 100HP shot when needed. I would do the Nitrous. Today 08:51 PM...
  7. 9

    Question

    Better flowing heads would get you closer,but unless you shed some serious weight,that setup will only get you mid to high 13's.You have a good combo,you just need a power adder to make the most out of it.Get a bottle of giggle juice,and have at it,...or save up for a blower and aim for 11's:)
  8. 9

    My pinging is so bad a mini van passed me.

    just my $.02,but if you didn't index the ACT correctly,you would still ping.If the incoming air doesn't flow thru the eye of the filament,and it ends up going around it,...then that may be your problem.I would pull the ACT out,and make a pencil mark on both sides of the eye(loop),and reinstall...
  9. 9

    Why Did Ford Stop Putting Strut Tower Braces in 99+ Mustangs?

    It was more of a decorative piece,rather than a functional one.Unless you do autox,...it's pretty useless.
  10. 9

    HP vs TORQUE? What's better??

    Great reply,you summed it up perfectly. :nice: Its not impossible,you just need $3700 for a whipple :D :p 458hp w/480ftpnds with a big fat curve is really fun on the street. :D
  11. 9

    What TB?

    With your basic mods,anything larger than a 65mm will actually hurt performance,rather than improve it.Not to mention that your throttle response will be non-existent.Even with HCI combos,70 is more than adaquate.To make the most out of ANY combo,your TB should match your manifold inlet...
  12. 9

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Sweet man,...PM me your address,and I'll ship it out to you :nice: Did they have to do much prep with the wing,or was it ready to paint out of the box?
  13. 9

    Post Your Newest Stang Pic, 94-95 Cars Only.

    That looks pretty slick,what do you want for it?Where did you get that wing,is it the Boss one?I haven't picked out a wing yet for my kit,and I really like the way it looks on your car :nice:
  14. 9

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Thanks man,that's why I sold my 88lx,...I really wanted a sn in that color. :p Its goin in for fresh paint and a Cervinis Stalker kit this winter,along with new 18" Saleens. Yeah,its the 1500 kit,but the compressor was beefed up a bit,...now it has the 2200 rotors :D It runs way cooler with...