Search results

The car was stolen in South Arlington. More info HERE Please call the police if you see a car that matches this description.

uhh I am 95% sure its BW. Well I guess Ill go tell my Amsoil guy that MTF is not the best idea for my Borg Warner T5. I just figured that MTF with additives for manuals would be better than synthetic ATF :( Thanks guys

I did this today to get my rear main seal out. Worked like a champ. I also did the same thing to get the Pilot bearing out of the crank too. The clutch you are getting is the same one I am putting on my car right now. Its a Valeo or however u spell it, so if you can find a King Cobra...

well what do Tremec's call for out of the factory? I'll run the fluid, and if anything breaks I will let yall know.

Well The amsoil guy said that ATF fluid is 10 weight??? Gm syncrhomesh cost 5 dollars more a quart so I dont want that. Yall are confusing me :shrug: I need more input please.

I just bought 3 quarts of Amsoil Synthetic Synchromesh Transmission Fluid I was confused for one since it had a 5w30 weight on it, and second its not red (that might sound dumb for some) I have a normal t-5 transmission.

I'd check that. That what was wrong with my car :nonono:

I know they are slotted. I was just saying that there is no way im going to buy drilled rotors for the street.

Well there is no way im geting crossed drilled rotors for the street. I have had a set on my car and they cracked. What about a caliper upgrade though?

I am looking for a brake upgrade for my fox. I want to go ahead and switch to 5 lug at the same time. I searched on yahoo and found nothing but cobra style brakes or better. Even though I have a fox I and going to use sn95 spindles and sn95 length axles. I plan on buying '06 cobra replicas...

check your vacuum. :shrug:

thank you mine seems about right

I have a E-cam, and I am trying to find out how much vacuum my car should have at idle. My car sits around 900 to 750 rpm. I checked my vacuum already it sits at 17 inches at 900 and less than 15 when it idles at 750 (with AC and headlights on).

how much is shipping on it? I ask because I saw no price on the page. 700 short block + 350 for forged pistons = 1050 and it still has oem rods. After flipping a few pages in 5.0 mag GTRhipo.com has a short block for 850 and it has (I assume) better pistons and forged rods. It doesnt come...

Adjust you clutch. I have had this problem with a new clutch and fork when my MM firewall adjuster would back off (since the MM unit has no jam nut), and the fork would rattle like crazy. When the clutch cable is loose the fork rests on the bellhousing and rattles. Hope this helps :nice:

could i be like that because the flywheel was resurfaced to thin?

That bushing was not supossed to be there in the first place. The DA previous owner left it stuck there. Ok now to the problem I have always had. My clutch from engaged to disengaged is about 2 inches of foot movement. No matter how I adjust it; all it seems to do is move the place of...

AH HA!! I found the problems.... That black rubber bushing is circled on the right. This is that black rubber bushing I would put money on my guess, but this is the old firewall grommet thing. My car is plagued by the previous owner.:bang: This rubber grommet has always been...

Should that pin (circled in teal) be al the way over to the right?

They make a 185 tire. OMG please dont buy a normal set of tires. Make sure you get a set of tires with the correct load rating. I have some 165s on mine and at 35psi they look like there low as hell.