Search results

I bought my daughter a 20011 V6 mustang with the sport package. The steering wheel only has the cruise control buttons on it. My question is, I have found a steering wheel off of a 2011 mustang that has the stereo buttons on it along witht the cruise controls.. Can I take this steering wheel...

I got my 1994 mustang put back together after being down for 6 years. The engine was zero decked, the heads were resurfaced. After driving the car I keep getting oil on top of the timing cover just in front of the intake. Now ive tried to see if its coming from the intake with no luck. And no i...

Last night I ran a 12.8 at 116mph. At the end of my run I was red lining 4th gear at 6000rpms. Im gonna buy some drag radials cuz im getting no traction. Should I buy a taller drag radial, and if I do, how much taller. Back tires are 275/35/18. later Orlie Posted via Mobile Device

Before I rebuilt my engine my boost gauge was reading 12psi. For the rebuild I went 20 over on the cylinders and ported the heads. This is the only change that was done to the engine. I went to the dyno on friday and was watching the boost gauge and I only saw 8lbs of boost. Why do you think...

Who here has installed a manual rack from flamming on there mustang. Im just wondering cuz im thinking of doing it. What would be the pros and cons of doing this. later Orlie

I thinking of using this stuff on the ends of my intake manifold, I had a huge leak on the rear of the intake with the cork gaskets. Yes I know im a dumb ass for using them. Has anyone used this stuff. Ive been reading on line and people say this stuff is the best. So what do you have to say...

I have these valve covers. http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS%2DM%2D6582%2DB301&N=700+400070+115&autoview=sku. Instructions : http://static.summitracing.com/global/images/instructions/fms-m-6000-a302r.pdf last night I took the car out and ran her pretty...

Last night I decided to try and fix my dip stick oil leak. I noticed on both heads that oil was between the block and the head. Got me nervous. I started looking around and noticed two oil puddles on both side off the timing cover. Im thinking its the intake manifold leaking out of the corners...

I installed a new engine, I had to removed the engine because my oil pan was leaking. Pulled the oil pan and found real fine what looked like real fine copper shavings. Is this normal for your first oil change. I didnt notice any shavings in the oil when I drained it. Not until I pulled the pan...

I installed a new engine, it now has 46 miles and it was going good. Then yesterday I took it out for about a 10 mile drive for break in. Got home and noticed oil running down the back of the oil pan. Could not tell where it was coming from. The pan or the rear main. When installing a clutch do...

For every one that has a fluidyne in there car, can you please take a picture of the over flow spout right under the radiatir cap. My fluidyne has nothing there, its just a hole. I called fluidyne and they said there should be some threads to screw a 1/8 inch nipple into(I said nipple). Not sure...

Does anyone run 2 wideband O2 sensors one for the left and right bank.. I know it pricey but does any one do it. Or do you guys feel you get enough info from one O2 sensor. I need to order one and in the process of figuring out which one to order, it a nightmare determining which one to buy...

So last night I finally took the car out for its first cruise with 42lb injectors and new engine. I was surprised the car idled great and started with out holding the gas pedle down. I really did not get on the throttle just keeping it under 3000rpms. I was happy I didnt have the surging and...

Does anyone run these control arms from summit racing. How did you like them, and did you notice a differance. http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D790000B&N=700+4294908331+4294924385+4294908282+115&autoview=sku later Orlie

I just finished installing my new engine. I tryed starting it and it will not fire up. I have spark, removed the spark glug wire and the spark is jumping across to the plug. So I know I have spark. I have fuel, depressed the shrader valve and fuel came out. Also gauge reads 38 psi. I havent...

I have a Paxton adjustable fuel regulator and was wondering where the vacuum hose attaches to. Im almost ready to start the car after 6 years and am just making sure every thing is correct.

I have these vacuum lines coming out of the passanger side fender by my vortech. Does anyone know what they are. later Orlie

Can any one with a cobra r style hood take a straight edge lay it across your car from fender to fender and measure from the bottom of the straight edge to the highest point of the intake manifold. Please let me know what size of cowl you have and the distance that you measured. I posted a...

How much of a cowl are you guys running with this set up. I want the cobra r style hood from 1995. I like the 2.5in cowl but unsure if i need more of a cowl. How would I go about measuring how much of a cowl I need. later Orlie

I installed my k-member and want to use the back slot to mount my engine. The only problem is this pushes the tranny back and now my tranny mount will not align with the tranny support. The tranny mount hangs over the tranny support. I then moved the engine to the front slot and now my...