Search results

I wouldnt be disapointed... SRT-4s are quick. Bone stock they can run high 13s at 100+, If he stayed pretty close with your car Id say it was probably only mildly modded. This is assuming your car traps about 105 or so.

This is a break down of how they run. 96-98 Cobra Gears Lts Ported/Short Runner Intake Tune Slicks High 11 Sec car 94-95 Cobra Heads Cam Intake Everything you can think of Mid 12 Sec car

I want to get an aluminum quadrant and firewall adjuster to use on a non adjustable clutch cable. I priced a stock clutch cable at a local parts store for my 93 2.3L coupe and it was $70. I then saw a clutch cable for an 86 SVO for $30 on ebay. Are they the same cable? If so could I buy that...

My 93 4 cyl notch had a similar problem. it turned out to be that the spark plugs were very old "probably the stock plugs". The eletrode and ground strap had burned down so much that it made a huge plug gap that the coils were having a hard time sparking at lower engine speeds under a load, such...

I want a strong clucth to put in my 93 2.3L coupe. Im wanting to turbocharge the N/A motor soon and want a clutch that will handle it. will an svo or t-bird TC clutch work or whaty do I need to get?

I allready have the gt brakes for the front and rear. Im putting the cobra brakes on a 4cyl fox coupe that i am putting a turbo coupe motor in to auto-x... I was wondering what i need spacer wise for the fronts with PBR dual piston calipers. And my car is a 97 so it has the little bit wider...

Ive bought 99+ PBR GT brakes for the front and gt brakes for the rear of my 97 Cobra, so I could run draglites. Im wanting a 15 x 8 rear wheel and a 15 x 3.5 front wheel. do i need a spacer on the front? Also what back spacing will i need on the rear? Basically i just need what ever information...

I just need to know what I need to do as far as the wiring and computer.. Can I use the Turbocoupe computer and modify my stock wiring harness to accept the Air Flow Sensor? Do I have to use the turbocoupe wiring harness? I want to be able to have my factory gauge cluster work and the...

Actually that line running to the top of the EGR is a vacuum line.. The wire Im talkin about is further back in the wiring harness... Ijust pushed it over the closest grounded stud I coukd find..

"ITS FIXED" Update, I finished changing the plugs, and I found a stud that was grounded and pushed the black wire on to it... The car runs perfect now... I couldnt be happier right now, I got the car on a real good deal with this problem, and just expected it to have a blown head gasket or...

I just got a 96 Gt Auto w/ 157,000 miles that does the same exact thing. I am in the process of trying to fix it as well. It has a miss when you give it throttle past a certain point, if you use very light throttle it will run fine, but over a certain point it will start sputtering.. When...

To make the 392 stroker It says you need. Factory 351w Block The 3.85" stroker crank Factory 351w rods Factory Compresion height 0.030 302 pistions And that will get you 392ci My questions Can I just hone the block and use stock Forged 5.0 HO pistons and end up with a 387 or so ci...

On the car I turboed I used a Holset h1c turbo from a Inline 6 Diesel engine that was on an old Crane.. Its the same turbo that was used on the Dodge Cummins Diesels..

Im wanting to get rid of everything off of my Cobra that doenst make it run and drive... Im wanting to get rid of the Smog, EGR, Anti Lock System, The Alarm, and all other useless electronics.. I just need to know if I can get a Tuner that can shut off all of those things in the computer...

You better shuffle shift your ass off... An AOD GT Vert Fox is gonna have its hands full with a Driver in a 96-98 Gt 5speed..

I thought explorers had 24 lb injectors stock?

My buddies 82 coupe with an efi 302 swaped in it has never ran right since it started up.. It has an A9L computer. how do you check to see if its throwing codes?

So we really have no idea what my ring thicknesses are.. I would like to order some rings before I pulled the rods and pistons out.

Thanks

Well. Im wanting to order a set of rings asap.. Where can I find out what my stock rings thicknesses are.